Samsung CL-34M30HS, CL-29M30HS, CL-29Z30HS manual Identifying Problems, Problem Possible Solution

Page 57

ChapterS P E C I A L F E AT UFiveR E S

T R O U B L E S H O O T I N G

If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center.

Identifying Problems

Problem

Possible Solution

 

 

 

 

Poor picture.

Try another channel.

 

 

Adjust the antenna.

 

 

Check all wire connections.

 

Poor sound quality.

Try another channel.

 

 

Adjust the antenna.

 

No picture or sound.

Try another channel.

 

 

Press the TV/VIDEO button.

 

 

Make sure the TV is plugged in.

 

 

Check the antenna connections.

 

 

Make sure the MUTE button is off.

 

No color, wrong colors or tints.

Make sure the program is broadcast in color.

 

 

Adjust the picture settings.

 

Picture rolls vertically.

Adjust the antenna.

 

 

Check all wire connections.

 

 

If you are using a VCR, check the tracking.

 

The TV operates erratically.

Unplug the TV for 30 seconds, then try operating it again.

 

Your remote control does not

Press the MODE button to put your remote control in the

 

operate your TV.

“TV” mode.

 

 

Make sure the remote has batteries.

 

 

Check that the “+” and “-” ends of the batteries are inserted

 

 

correctly.

 

 

Check that the batteries are drained.

 

The TV won’t turn on.

Make sure the wall outlet is working.

 

 

Make sure the TV is plugged in.

 

 

Make sure the remote has batteries.

 

The visual qualities of digital

The visual qualities of digital channels may vary

 

channels vary.

depending on the original production method (analog

 

 

or digital).

 

 

• If the original production method is digital: High visual

 

 

quality program.

 

 

• If the original production method is analog: The digital

 

 

program displayed on the screen is originally an analog

 

 

program which has been converted to digital. The visual

 

 

quality is of an SD grade visual quality.

 

Although the TV caption shows HD,

The HD caption that appears when switching channels

 

the visual quality is not satisfactory.

or when pressing the Information button on the remote

 

 

control means the selected channel is a digital channel. If

 

 

the broadcasting station converts an analog signal into

 

 

digital and transmits the signal, the visual quality may not

 

 

be perfect.

 

 

 

 

English - 57

Page 56 Page 58
Image 57
Page 56 Page 58
Contents Owner’s Instructions English Installation Your New TVOperation Special Features TroubleshootingAppendix Accessories List of FeaturesFamiliarizing Yourself with The TV Audio Input Connection Jacks Side´ Video Input Video InputAudio Input jacks Connection Jacks Rear´ Video Input jack Audio-Video Output jacksMode Remote Control¨ Number buttons +100VCR/DVD Controls ˛ TV/COMPONENTConnecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsPlug the adaptor into the ANT in terminal on the rear panel Antennas with 75-ohm Round Leads Connecting Cable TVSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsCable Box Switch TV Rear Panel Connecting a VCRConnecting a Second VCR to Record from the TV Connecting to Y, PB, PR Connecting a DVD PlayerConnecting a Digital TV Set-Top Box TV Side Panel Connecting a CamcorderConnecting to an Analog Amplifier Installing Batteries in the Remote Control Press the Power button on the remote control Plug & Play FeatureTurning the TV On and Off Message Plug & Play is displayedExit Viewing the Menus and On-Screen Displays Viewing the MenusViewing the Display Selecting a Menu Language Memorizing the Channels Selecting the Video Signal-sourceStoring Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Using the Number Buttons Using the Channel ButtonsUsing the PRE-CH Button to Select the Previous Channel Changing Channels√ button Labeling the ChannelsClock 10 30 am Setting the ClockPicture Control Using Automatic Picture SettingsCustomizing the Picture Press the or button to select Color tone Resetting the Picture Settings to the Factory DefaultsAdjusting the Volume Using the Mute ButtonSound Control Using Automatic Sound Settings Press the œ or √ button toSelect a particular item Customizing the Sound Setting the Signal Source Viewing an External Signal SourceSet other signal sources AV1, AV2, AV3, S-Video Assigning Names to External Input ModeFine Tuning Channels Press the œ or √ button to adjust the fine tuningPress the or button to select Fine tune Changing the Screen Size depending on the model Digital Noise Reduction Tilt Again to set the timer Using the R.Surf FeatureFreezing the Picture Press the R.SURF buttonChoosing a Multi-Channel Sound MTS track Press the or button to select Auto volume Auto VolumeSetting the Surround Setting the Turbo Sound Press the … or † button to select On Timer Setting the On/Off TimerSetting the Sleep Timer Press the œ or √ button to adjust volume level Setting the Preferred Volume Level and ChannelViewing Closed Captions On-Screen Text Messages Press the or button to select ModePress the œ or √ button to select the channel to be locked Locking the Channel Setting the On/Off Melody Customizing Your Remote Control Remote Control Codes VCR Codes Cable Box Codes DVD Codes Problem Possible Solution Identifying ProblemsCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications This page is intentionally Left blank Country Customer Care Center Web Site Contact Samsung WORLD-WIDE
Top Page Image Contents