O P E R AT I O N
4
Press the VOL+ or VOL- buttons to select the desired video sig- nal source. Press the Menu button to enter the video signal source, and then “Ant. Input check” is automatically dis- played.
5
Make sure that the antenna is connected to the TV.
Press the VOL+ or VOL- buttons. The “Auto Porgram” is active. Press the Menu button to skip. (refer to “Auto program” on page 3.6.)
6
The message “Enjoy viewing your new TV” is displayed.
7
If you want to reset this feature
(1)Press the Menu button.
(2)Press the CH▼ button three times to highlight the FUNC- TION menu and press the VOL+ button.
(3)Press the CH▼ button five times to select the Plug & Play and press the VOL+ button.
The message “Plug & Play” is displayed.
3.2 CHAPTER THREE: OPERATION