Samsung DCB-B270R manual Troubleshooting, Disposal

TROUBLESHOOTING

Problem	Possible cause	Solution of the problem
No display LED on	Power cord	Power cord plug in correctly
the front panel;	not plugged in correctly
No power supply
No pictures on the screen	Receiver in Standby mode;	Set receiver to “On”;
	SCART not connected tightly	Check connection;
	to video output of television;
	incorrect channel or video	Check channel and video output
	output selected on television	(TV instruction manual)
No sound	SCART connected incorrectly;	Check connection;
	Loudness level = 0;	Increase loudness on television set;
	Muting active	Press the MUTE key
Remote Control does not	Incorrect operation;	Point remote control
operate directly		towards the Receiver.
	Batteries dead or inserted	Replace batteries or insert correctly
	incorrectly
Poor picture quality	Signal strength too low	Check all wire connections.
signal strength in
On-Screen Error Messages:	cable not connected or not	Check connection
“Searching for signal”	tight
“No signal”
On-Screen Error Message	Channel lists not installed	Scan channels. Please go to Installation
“No programs are stored”		menu
On-Screen Error Messages:	Smartcard:	(depend on model)
“Smartcard failure”	- not plugged in correctly;	Check the Smartcard.
“Unknown smartcard”	- not plugged in.	“Insert the Smartcard.”
“Please insert Smartcard”.

DISPOSAL

The device, packaging material (e.g. Styrofoam) and the batteries must never be disposed of with household refuse. Please obtain appropriate information about the regulations in your community, and dispose of all refuse in accordance with regulations at the separate locations provided.

DCB-B270R

GB

L E R E C E I V E R GB-25