Samsung TX S2782H, TX S3082WH, TX-S2779H manual Connecting a VCR, Connecting an S-VHS VCR

Page 10

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 8~9). Skip step 1 if you have not yet connected to an antenna or a cable system.

VCR Rear Panel

2

TV Rear Panel

5Audio Cable (Not supplied) 4 Video Cable (Not supplied)

1.	Unplug the cable or
	antenna from the back of
	the TV.
2.	Connect the cable or
	antenna to the ANT IN
	terminal on the back of the
	VCR.
3.	Connect an Antenna cable
	between the ANT OUT
	terminal on the VCR and
	the ANT 1 IN (AIR) or ANT
	2 IN (CABLE) terminal on
	the TV.
4.	Connect a Video Cable
	between the VIDEO OUT
	jack on the VCR and the
	AV IN 1 [VIDEO] jack on
	the TV.

3Antenna cable (Not supplied)

➢Each external input source device has a different back panel configuration.

➢When connecting an external device, match the color of the connection terminal to the cable.

➢Also, you can connect to “AV IN 2” on the side panel of TV.

5. Connect Audio Cables

between the AUDIO OUT

jacks on the VCR and the

AV IN 1 [L-AUDIO-R]

jacks on the TV.

➢ If you have a “mono”

(non-stereo) VCR, use a

Y-connector (not supplied)

to hook up to the right and

left audio input jacks of

the TV. If your VCR is

stereo, you must connect

two cables.

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.)

TV Side Panel

TV Rear Panel

VCR Rear Panel

3 Audio Cable (Not supplied)

2 S-Video Cable (Not supplied)

1 Antenna cable (Not supplied)

An S-Video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)

➢Each external input source device has a different back panel configuration.

➢When connecting an external device, match the color of the connection terminal to the cable.

➢Some games may be displayed with a cut off picture when the TV is connected to a game player.

1.To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV.

2.Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN2 [S-VIDEO] jack on the TV.

3.Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN2 [L-AUDIO-R] jacks on the TV.

English-10

Image 10

Contents Owner’s Instructions English-2 Contents Accessories List of FeaturesGeneral Information Viewing the Control Panel Power IndicatorRemote Control Sensor Buttons on the Lower-Right Part of the PanelRear Panel Jacks Upgrade Port USB For service onlyViewing the Connection Panel Side Panel JacksRemote Control If the remote control doesn’t work, check the following Installing Batteries in the Remote ControlConnecting VHF and UHF Antennas ConnectionsConnecting to a Cable Box that Descrambles Some Channels Connecting Cable TVConnecting to a Cable Box that Descrambles All Channels Cable without a Cable BoxConnecting a VCR Connecting an S-VHS VCRConnecting a DVD Player/Set-Top Box Connecting a Second VCR to Record from the TVConnecting a Camcorder English-11Connecting a DVD Player/Set-Top Box via Hdmi Connecting a Digital Audio SystemOperation Connecting an Amplifier/DVD Home TheaterPlug & Play Feature Turning the TV On and OffClock Mode. menu is automatically displayed Setting the Clock AutomaticallyTV will begin memorizing all of the available channels Press the Enter buttonChanging Channels Viewing the Display Adjusting the VolumeUsing Mute Button Viewing the MenusStoring Channels in Memory Automatic Method Selecting the Video Signal-sourceMemorizing the Channels English-17Setting Up the Remote control to Operate Your VCR Setting Up Your Remote ControlSetting Up the Remote control to Operate Your Cable Box Setting Up the Remote control to Operate Your DVD Setting Up the Remote control to Operate Your Set Top BoxRemote Control Codes Brand CodeProduct Code 007 008 009 010 000 001BD Record 005 VCR Record 012English-23 To Select the SourceTo Edit the Input Source Name Source ListEnglish-24 Using Automatic Picture SettingsPicture Control PictureChanging the Screen Size Resetting the Picture Settings to the Factory DefaultsViewing with a 43 signal When a 43 signal is received Screen size selection depends on the type of video inputSound Control Setting the Film ModeUsing Automatic Sound Settings TiltBandwidth Adjustment 100Hz, 300Hz, 1KHz, 3KHz, 10KHz Setting the SRS TruSurround XTSound Balance Adjustment Customizing the SoundChoosing a Multi-Channel Sound MTS track Digital Automatic Volume ControlReduces the differences in volume level among broadcasters Preferred LanguageMulti-Track Sound Setting the On/Off MelodyChoosing a Multi-Channel Sound MTS track Analog English-29Adding and Erasing Channels Channel ControlSelecting the Antenna English-30You can set channels you watch frequently as favorites To set-up Your Favorite ChannelsEnglish-31 Viewing the Channel Lists Setting the Default Channel List ModeEnglish-32 Press the Menu button to display the menu Fine Tuning Analog ChannelsLabeling Channels English-33Signal Strength Checking the Digital-Signal StrengthUsing the R.Surf Feature English-34Option 1 Setting the Clock Manually Time SettingSetting the Time English-35English-36 Option 2 Setting the Clock AutomaticallySetting the On/Off Timer Time ZoneTo cancel the set sleep timer Setting the Sleep TimerEnglish-37 Function Description Using the V-ChipSetting Up Your Personal ID Number PIN Selecting a Menu LanguageHow to Set up Restrictions Using the TV Parental Guidelines How to Enable/Disable the V-ChipEnglish-39 English-40 How to set the FV, V, S, L and D sub-ratingsTV Parental Guidelines English-41 Mpaa RatingEnglish-42 How to Set up Restrictions Using the ‘Canadian English’Canadian English English-43 How to Set up Restrictions Using the ‘Canadian French’Canadian French English-44 Using the V-Chip for Digital channelsDownloadable U.S. Rating English-45 Viewing Closed CaptionsOn-Screen Text Messages DigitalDigital Captions function operates on digital channels CaptionViewing Closed CaptionsOn-Screen Text Messages Analog English-46Menu Transparency Level Setting the Blue Screen ModeSetting the Function Help Displays help on the menu functionsProblem Possible Solution Identifying ProblemsSpecifications AppendixThis page is intentionally Left blank This page is intentionally Left blank This page is intentionally Left blank Contact Samsung WORLD-WIDE