Changing Channels

Air 31

Stop

Enter

Skip

TV	Clock		Set
Hour	Minute	am/pm
--	--	am

√ Move

Adjust

Skip

Plug & Play

Enjoy your watching.

If you want to reset this feature...

TV		Setup
Plug & Play			√
Language	:	English	√
Time			√
V-Chip			√
Caption			√

† More

Move	Enter		Return
Plug &		Play
Start	Plug	& Play.
	OK
Enter		Return

4.Press the ENTER button to select “Start”.

The TV will begin memorizing all of the available channels.

Press the ENTER button to stop. After all the available channels are stored, the “Clock Set” menu appears.

➢Refer to “Memorizing the Channels” on page 16.

5.Press the œ or √ button to move to the Hour, Minute or am/pm. Set these by pressing the … or † button.

➢Refer to “Setting the Time” on page 25.

➢You can set the hour and minute directly by pressing the numeric buttons on the remote control.

6.When you have finished, press the MENU button.

The message “Enjoy your watching.” is displayed, then the channel which has been stored will be activated.

1.Press the MENU button to display the menu.

Press the … or † button to select “Setup”, then press the ENTER button. The “Plug & Play” is selected.

2.Press the ENTER button again.

This feature starts with the message “Start Plug & Play.” displayed. For further details on setting up options, refer to the previous page.

➢ Plug & Play can only be accessed in the TV mode.

Using the Channel Buttons

1. Press the CH or CH button to change channels.

➢When you press the CH or CH button, the TV changes channels in

sequence.

You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 16 to memorize channels.

Using the Number Buttons

Use the number buttons to quickly tune to any channel.

1. Press the number buttons to go directly to a channel. For example, to select channel 27, press “2,” then “7.”

The TV will change channels when you press the second number.

Continued...

English-14