Picture Control
Using Automatic Picture Settings
Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, “Custom”) that are preset at the factory. You can activate either Dynamic, Standard, Movie, or Custom by making a selection from the menu.
TV |
|
| Picture | |
Mode |
| : Dynamic | √ | |
Size |
| : | 16:9 | √ |
Digital NR | : | On | √ | |
Tilt |
| : | 0 | √ |
Film | Mode | : | Off | √ |
Move | Enter | Return |
TV |
|
| Picture |
Mode | : |
| Dynamic |
Contrast |
| Standard | |
| 16:9Movie | ||
Brightness | : | Custom | |
40 | |||
Sharpness | : | 65 | |
Color |
| : | 50 |
† More |
|
| |
Move | Enter |
| Return |
1.Press the MENU button to display the menu.
Press the … or † button to select “Picture”, then press the ENTER button.
2.Press the ENTER button twice to select “Mode”.
Press the … or † button to select the “Dynamic”, “Standard”, “Movie”, or “Custom” picture setting, then press the ENTER button.
Choose Dynamic to increase the clarity and sharpness of the picture. Choose Standard for the standard factory settings.
Choose Movie when watching movies.
Choose Custom if you want to adjust the settings according to personal preference.
Press the P.MODE button on the remote control to select one of the standard picture settings.
Contrast
100
Move | œ √ Adjust |
TV |
|
| Mode |
… More |
|
| |
Tint |
| : G 50 R 50 | |
Color Tone | : | Cool2 | |
Reset |
| : | Cool1 |
| Normal | ||
|
|
| Warm1 |
|
|
| Warm2 |
Move | Enter |
| Return |
TV |
|
| Mode |
… More |
|
| |
Tint |
| : G 50 R 50 √ | |
Color | Tone | : | Normal √ |
Reset |
|
|
|
3.Press the … or † button to select “Contrast”, “Brightness”, “Sharpness”, “Color” or “Tint” then press the ENTER button.
➢After adjusting an item, the gauge will automatically disappear (after about 10 seconds).
4.Press the œ or √ button to decrease or increase the value of a particular item.
➢• Each adjusted setting will be stored separately according to its input mode.
•When you make changes to Contrast, Brightness, Sharpness, Color, or Tint, OSD color will also be adjusted accordingly.
5.Press the ENTER button to return to “Mode”.
6.Press the … or † button to select “Color Tone”, then press the ENTER button.
7.Press the … or † button to select “Cool2”, “Cool1”, “Normal”, “Warm1”, or “Warm2”, then press the ENTER button.
➢Only TV, AV and
Resetting the Picture Settings to the Factory Defaults
8.Press the … or † button to select “Reset”, then press the ENTER button.
Press the EXIT button to exit.
➢ Each picture mode can be reset.
Move | Enter | Return |