Samsung TXJ1366 Alignment and Adjustments, Service Mode Adjustments, Service Mode Menus, Xxx

Alignment and Adjustments

4. Alignment and Adjustments

4-1 Service Mode Adjustments

4-1-1 Service Mode Menus

Since there are no VRs in the K15A chassis, all adjustments after parts replacement must be done in the Service Mode. Service Mode adjustments are necessary when either the EEPROM (IC902) or the CRT is replaced.

4-1-2 Entering the Service Mode

Press the following transmitter keys while in STAND-BY mode:

MUTE—>1—>8—>2—>POWER “Factory Mode Menu” is displayed

	<---selected (violet)
ADJUSTMENT
PATTERN
OPTION
RESET

Enter Service Mode using the Volume +,- keys. Service Mode Menu:

		RC	XXX
AGC	XX
VCO	XX	GC	XXX
SBT	XX	BC	XX
SCT	XX	VA	XX
SCR	XX	VS	XX
STT	XXX	HS	XX
GG	XXX	SS	XX
BG	XXX	SVC : MUTE

Select a mode to be adjusted, using the chan- nel down key. Example: VCO.

AGC	XX	RC	XXX
		GC	XXX
VCO	XX
SBT	XX	BC	XX
SCT	XX	VA	XX
SCR	XX	VS	XX
STT	XXX	HS	XX
GG	XXX	SS	XX
BG	XXX	SVC : MUTE

Change the data with “Volume +, - “ keys.

VCO 71

Return to the Service mode by pressing MENU.

AGC	XX	RC	XXX
			XXX
VCO	XX	GC
SBT	XX	BC	XX
SCT	XX	VA	XX
SCR	XX	VS	XX
STT	XXX	HS	XX
GG	XXX	SS	XX
BG	XXX	SVC : MUTE

Return to the Factory mode via the MENU key.

ADJUSTMENT

PATTERN

OPTION

RESET

Press POWER to enter the Stand-by mode.

Samsung Electronics 4-1