Samsung TXJ1366 specifications Adjustment in Option Mode, Service Mode Adjustments

Alignment and Adjustments

4-1-3 Adjustment in Option Mode

This adjustment is necessary whenever the EEPROM is replaced. Input data (as marked on the back cabinet).

ADJUSTMENT

PATTERN

OPTION

RESET

Select “SET OPTION” by pressing the Channel ▼ key twice.

ADJUSTMENT

PATTERN

OPTION

RESET

Press the Volume +, - keys to enter the set Option mode.

BYTE 0 : 0 0

Press MENU to go back to the factory mode.

ADJUSTMENT

PATTERN

OPTION

RESET

Select RESET with channel ▼ key.

ADJUSTMENT

PATTERN

OPTION

RESET

Press volume + key.

POWER

OFF

4-1-4 Service Mode Adjustments

ADJUSTMENT

PATTERN

OPTION

RESET

1.The Pattern Adjustment is done only in the factory. Do not attempt to readjust it.

2.Refer to 4-2 for other adjustments.

3.Set OPTION data.

4-1-5 Service Mode Adjustment Ratings

No	Item	Function	Range	Initalized
				MICOM Data
1	AGC	RF AGC Adjustment	0~63	50
2	VCO	PIF VCO Adjustment	0~127	63
3	SCT	SUB-CONTRAST Adjustment	0~63	48
4	SCR	SUB-COLOR Adjustment	0~27	13
5	STT	SUB-TINT Adjustment	0~27	7
6	RC	RED-CUT OFF Adjustment	0~255	0
7	GC	GREEN-CUT OFF Adjustment	0~255	0
8	BC	BLUE-CUT OFF Adjustment	0~255	0
9	SVC	Input a Horiz line pattern
10	GG	GREEN-GAIN Adjustment	0~255	127
11	BG	BLUE-GAIN Adjustment	0~255	127
12	SBT	SUB-BRIGHTNESS Adjustment	0~63	31
13	VA	VERTICAL SIZE Adjustment	0~63	39
14	VS	VERTICAL CENTER Adjustment	0	0
15	HS	HORIZONTAL Phase Adjustment	0~31	15
16	SS	SUB-SHARPNESS Adjustment	0~31	4

Note : The initial MICOM data values take effect when IC902 is replaced.

4-2 Samsung Electronics