Samsung AA68-03265A-00, CFTD2085, CFTD2785 manual Connecting a Second VCR to Record from the TV

Page 14

03233A(E)-CHAPTER 2 11/28/03 1:34 PM Page 4

I N S TA L L AT I O N

5

Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

6

Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV.

After you’ve made this connection, set the A/B switch to the “A” position for normal view- ing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B,” you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

Connecting a Second VCR to Record from the TV

Your TV can send out signals of its picture and sound to be recorded by a second VCR.

To do this, connect your second VCR as follows:

1

Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

2

Connect a set of audio cables between the VIDEO/AUDIO OUT jacks on the TV and the VIDEO/AUDIO IN jacks on the VCR.

(The VCR input jacks might be either on the front or on back of the VCR.)

If you have a mono VCR, connect L(mono) to VCR audio out using only one audio cable.

Refer to your VCR’s instructions for more information about how to record using this kind of connection.

CHAPTER TWO: INSTALLATION 2.4

Image 14

Contents Owner’s Instructions TV Operation InstallationYour New 3Way Combination Unit DVD OperationTroubleshooting VCR OperationDVD Features List of FeaturesTV Features VCR FeaturesFamiliarizing Yourself with The 3way Combination Unit Front Panel ButtonsTimer indicator ˝ Remote Control Sensor∏ Stand by indicator ’ REC indicatorRear Panel Jacks AUDIO-VIDEOMTS Multichannel Television Stereo Remote Control TV Function Buttons´ +100 VOL +, VOLRemote Control DVD Function Buttons ’ Play/pause Remote Control VCR Function ButtonsSLOW+ Antennas with 75-ohm Round Leads Connecting VHF and UHF AntennasAntennas with 300-ohm Flat Twin Leads Separate VHF and UHF Antennas Connecting Cable TVConnecting to a Cable Box that Descrambles All Channels Cable without a Cable BoxANT IN, VHF IN, or simply, Connecting to a Cable Box that Descrambles Some ChannelsThis terminal might be labeled Connect this cable to a two-way splitterConnecting a Second VCR to Record from the TV Connecting a Camcorder Connecting an Audio System When playing a DVD Installing Batteries in the Remote Control Make sure to match the +Viewing the Menus Turning the TV On and OffViewing the Menus and On-Screen Displays Viewing the DisplayPress the LEFT/RIGHT œ√ buttons Selecting a Menu LanguagePress the Menu button to display the menu Selecting the Video Signal-source Memorizing the ChannelsStoring Channels in Memory Automatic Method TV automatically cyclesAdding and Erasing Channels Manual Method Using the Pre-CH Button to select the Previous Channel Using the Channel ButtonsDirectly Accessing Channels Changing ChannelsAdjusting the Volume Using MuteWill automatically disappear after about 3 seconds After adjusting an item, the gaugeCustomizing the Picture Using Automatic Picture Settings Alternate methodChanging the Color Tone Changing the Screen Size Depending on the model Press the LEFT/RIGHT œ√ buttons to adjust the fine tuning Fine Tuning ChannelsAfter you adjust the fine tuning Digital Noise Reduction Tilt Depending on the model Customizing the Sound Using Automatic Sound Settings Choosing a Multi-Channel Soundtrack MTS Viewing a VCR or Camcorder Tape When selecting the hours, be sure Setting the ClockOption 1 Setting the Clock Manually You press the Display buttonSetting the Date Press the Right √ button Sequence ATL., EAST, CEN., MTN., PAC., ALAS., HAW Clock is set Press the Menu button to exitSet the TV’s clock. See Setting the Clock on Setting the On/Off TimerBefore using the timer, you must When you set the hours, makeWhen finished, press Right √ button Press the Right √ button to highlight OffSetting the Sleep Timer After about 3 seconds, the sleepViewing Closed Captions Misspellings and unusualUsing the V-Chip Setting Up Your Personal ID Number PINEnter pin screen will appear. Enter your 4-digit PIN number How to Enable/Disable the V-ChipHow to Set up Restrictions Using the TV guidelines General audience TV GuidelinesTV-Y Young children TV-Y7 Children 7 and over Parental guidanceHow to set the FV, D, L, S and V sub-ratings NC-17No children under age Adults only NR Not rated Playback Pausing PlaybackPlaying a Disc Stopping PlaybackStep Motion Playback Except CD Slow Motion Playback Except CDSkipping Tracks Using the Search and Skip FunctionsSearching through a Chapter or Track Press the FWD orUsing the Display Function When Playing a MP3/WMAYour MP3 files should be ISO 9660 or Joliet format When Playing a MPG To play another Mpeg folderSlide Show When Playing a Picture CDRotating and Reversing the picture Next skip or back Skip button Press the UP/DOWN Viewing the Album ScreenIf you press the Enter button Depending on the disc, the Disc Using the Disc MenuUsing the Title Menu Menu may not workYou may use the number but Displaying the Disc InformationInformation will be displayed Press the DVD Menu button during playDVD O P E R AT I O N Using the Zoom Function DVD/VCD Mark is displayedUsing the Bookmark Function DVD/VCD Recalling a Marked Scene Clearing a BookmarkRepeat Play Press the DVD Menu but- ton during playDVD Press the LEFT/RIGHT œ√Using the EZ View Depending on the model Screen FITDisc will be played Program Play CDProgram Playback Press the DVD Menu but- ton during play Press the UP/DOWNChanging the Camera Angle Setting up the Language Features This function depends on whatSetting up the Audio Options Digital output Off, Bitstream, PCMSetting up the TV Aspect Use to turn on-screen messages on or off Setting up the Display OptionsAdjusts the brightness of the screen Setting up the Parental Control Enter New Password Don’t try to insert a tape upside When you’re finished playing aInserting and Ejecting a Video Cassette Tape Playing the Tape PausingPlaying a Pre-Recorded Video Cassette Tape For information on inserting aFor information on inserting Using Picture SearchUsing Automatic Tracking Insert and play a video cassette tapeWhile a tape is playing, press the Info button twice Using the Time CounterCounter displays time only Using Memory Stop Press the Clear button to reset the timer toSerted, the Picture Plus feature will be Off Using P.PLUSFor this feature to work, If the tape is ejected and reinRecording TV Programs As You Watch RecordingSee Editing While RecordingFor information on recording After ten minutes in the pauseFor information, see Recording Using Advanced Recording FeaturesUsing One-Touch Recording VCR begins recordingPress the Menu button Recording at a Later TimeClock must be set to the cor Press the Right √ button. The Starting hour will selectPress the Right √ button. The ending hour will select To enter additional program For more information onSelecting tape speeds, see pages 5.6, 5.7, and A.2 Information for the first program appears on the screen Using Program ReviewProgram Review is only available Press Menu to return to normal viewing Using True RepeatFor information on viewing Press the Stop button to end the repeatAt a minimum five-second interval Using Block RepeatPlaying a tape, see pages 5.1 MTS Recording / Monitor Mode Using the HiFi StereoSelecting the HiFi Mode Hi-Fi audio tack 2-channel Normal audioVideo Dubbing Making the ConnectionsTheVCR will be recording from Video DubbingImportant Warning One Federal Button. on the playback VCR or camcorderSlow motion Using Special Playback FeaturesFrame Advance Identifying TV Problems Chapter SixIdentifying DVD Problems Identifying VCR Problems Cleaning and Maintaining Your 3Way Combination Unit Using Your 3Way Combination Unit in Another CountryCaring for Video Cassette Tapes Learning About Video Cassette TapesChoosing the Proper Tapes Choosing the Correct Recording SpeedSending Tapes to Another Country SpecificationsUsing the Record Safety Tab