Samsung DVD Recorder setup guide Clock Set, Video Setup

Step Setup

Step

Wait! Make sure you complete Step before proceeding with Step .

After all connections are complete, plug the power cord in the wall outlet. The word “AUTO” will flicker in the front panel display. It means that the current time is being set automatically (Auto Program) through the antenna under connection and also the chan- nel is being set. The setup may take a few minutes. When it normally operates, the current time is automatically set and displayed in the front panel display.

If “- - - -“ appears, however, it means that auto time setting has failed. In that case, set the current time through the manual initial setup.

For ease of use, we recommend that you complete the following set- tings before using the DVD Recorder.

Turn on your TV and any other connected equipment

OSD(On-Screen Display) Language Setup

Clock Set

Channel Set

Audio Setup

Turn on your TV and any other connected equipment

OSD Language Setup

Press the DVD POWER button.

The initial set up OSD language menu will appear.

Select the desired lan- guage using the number buttons.

Clock Set

With the unit in Stop mode, press the MENU button.

Select Setup using the

	No Disc			Setup
…/†buttons, then press
the √ or ENTER but-		System		√
		Language		√
ton.		Audio		√
		Video		√
		Parental Control		√
	MOVE	SELECT	RETURN	EXIT

Video Setup

-

Select System using the …/† buttons, then press the √ or ENTER button.

No Disc			System
	Clock Set		√
	Channel Set		√
	CM Skip Time	: 15 Sec	√
MOVE	SELECT	RETURN	EXIT

-

-

-

Select Clock Set using
	No Disc		Clock Set
the …/† buttons, then
press the √ or ENTER
		Auto Clock Set	√
button.		Manual Clock Set	√

MOVE SELECT RETURN EXIT

Select Auto Clock Set using the …/† buttons, then press the

√or ENTER button.

Select On using the	No Disc		Auto Clock Set
…/† buttons, then
press the √ or ENTER		Auto Clock Set	Off
			: On		√
button.		Clock Data CH	: AutomaticOn		√
		Time Zone	: Automatic		√
		Daylight Saving	: Automatic		√
	MOVE	SELECT	RETURN	EXIT

The DVD Recorder automatically sets the clock by searching for a channel that carries a time signal and sets your time zone and daylight saving(if applicable).

If your clock is set to the wrong time zone or daylight saving,

you can adjust these settings without turning off the Auto Clock Set function (see page 24). If your clock cannot be set automatically, set the clock manually (Refer to “Manual Clock Set” on page 25 of the Instruction Manual for more information).

3