Speaker setup
Dolby Pro Logic II decoder
1 |
2 |
2 |
To adjust the speaker balance
1Press the SPEAKER button.
•Each time you press the button, the speaker is selected in the order of FL➝ C ➝ FR ➝ SR ➝ SL ➝ SU ➝ VOL.
You will see this on the unit's display.
2Use the + and - buttons to adjust the volume on the desired speaker.
•The volume can be adjusted with in the range of
To test the speakers
Dolby Pro Logic II is a new format for playing multichannel audio signals that offers improvement over conventional Dolby Pro Logic. It can be used to decode not only sources recorded in Dolby Surround, but also regular stereo sources into five channels (front left/right, center and surround left/right). In addition, various parameters can be set according to the type of source and contents, so you can adjust the sound field with greater precision.
Select the source you want to use. (CD, Video, FM/AM, Input (L1, L2, TV CH))
1Press the SOUND MODE button.
•Press the SOUND MODE button repeatedly to select Dolby Pro Logic II.
2Press the SOUND EFFECT button.
•Each time you press the button, the sound effect changes as follows.
1 |
1 |
1Press the TEST button.
•Each time you press the button, the test tone will be heard in the order of FL (Front speaker/L) ➝ C
(Center speaker) ➝ FR (Front speaker/R) ➝ SR (Surround speaker/R) ➝ SL (Surround speaker/L) ➝ SU (Subwoofer).
2To stop the test tone, press the TEST button again.
➢You can adjust the speaker balance for the selected channel using the Volume Control buttons during the test tone operation.
2 |
3Select the desired mode ("MATRIX", "MOVIE" or "MUSIC").
•Matrix: Use when playing sources recorded in monaural.
•Movie: Use this when viewing movies.
•Music: Use this mainly for music listening.
➢◆ Dolby Pro Logic II may not be selected depending on the disc used. (DTS DVD, Dolby Digital 5.1, MP3)
◆When playing a DVD recorded in
◆Dolby Pro Logic II operates only when CD, VIDEO, FM/AM, or INPUT (LINE1, 2 or TV Broadcast) is selected. Mode, Sound Effect cannot be selected while the DVD signal is being input.
52 | 53 |