Troubleshooting, Wireless Home AV Center

Troubleshooting

If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center.

WIRELESS HOME AV CENTER

Problem	Possible Solution
Poor picture quality	Try another channel. Adjust the antenna. Check all wire connections.
Poor sound quality or no sound.	Try another channel. Adjust the antenna. Make sure the “MUTE” button is off.
No picture or sound.	Try another channel. Make sure the Set-Top Box is plugged in. Check the
	antenna connections.
No color or wrong colors.	Make sure the program is broadcast in color.
Remote control failure.	Press the STB button to enter the DTV mode. Check for batteries.
A/V Center won’t turn on.	Make sure the wall outlet is working. Make sure the remote has batteries.
	Check if the power plug is connected.
No output from the TV OUT	No Video output from the external input source is available on this terminal.
	Available input sources are AIR and Cable. Audio output for all input sources is
	available.
Video and audio breakups	This product adopts 5GHz wireless LAN technology. Since wave length of signal
	is very short, signal cannot go through concrete wall. This causes video and
	audio breakups. For a better reception, PDP needs a line of sight to the
	WIRELESS HOME AV CENTER.

PDP

Problem

Poor picture.

Your remote control does not operate the PDP.

The PDP won’t turn on.

There is no screen image.

The image is too light or too dark.

The image is too large or too small.

If the message “No Wireless Signal or Please Check WIRELESS HOME AV CENTER Power” appears:

This message is displayed when the communication between the PDP and the WIRELESS HOME AV CENTER fails.

Possible Solution

Check all wire connections.

Press the “MODE” button to put your remote control in the “TV” mode.

Check if the power plug is connected.

Check to see that both the PDP and the source are plugged in and turned on.

Adjust the Brightness or Contrast settings.

Adjust the Size settings.

Check whether the WIRELESS HOME AV CENTER’s Power is turned ON. Check whether the Wireless LED on the front panel is lit Green (If not, move the WIRELESS HOME AV CENTER to a location where the Green LED lights up).