Samsung HPM5027 manual Viewing the Picture-in-Picture, Selecting the PIP Screen

Viewing the Picture-in-Picture

Selecting the PIP Screen

Press the Menu button. Move the joystick up or down to

1 select the “PIP”, then press the joystick to enter.

!Quick way to access the PIP: Just press “PIP” on the remote control.

Move the joystick left or right to select the “On”.

2 The PIP image will appear in the corner of the screen.

PIP

SelectOff

Move Enter Exit

PIP

SelectOn

Locate

Source

Selecting an External Signal

You can use PIP to view a signal from an external source, such as a VCR.

Press the Menu button. Move the joystick up or
1 down to select the “PIP”, then press the joystick to		PIP
	Select	On
enter.

			Locate
	!	Quick way to access the PIP source: Just press	Source
		“Source” in the cover on the remote control.
			Move	Adjust	Exit
2	Move the joystick up or down to select the
					PIP
	“Source”, then move the joystick left or right to
			Select		On
	enter.		Locate
			Source

Move Adjust Exit

Move Adjust Exit

3 Press the Menu button to exit.

Note

• The PIP function operates in only PC mode or Component2 mode.

Move the joystick up or down to select an external

3 signal, then move the joystick left or right.

The signal from these inputs will not appear if you have not connected any equipment to the PDP’s input jacks.

4 Press the Menu button to exit.

PIP

VIDEO

S-VIDEO

COMPONENT 1

MoveExit

26

27