Samsung HP-S4273, HP-S5073 manual Connecting Cable TV, Cable without a Cable Box, English-10

Page 10

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1.Plug the incoming cable into the ANT2 IN(CABLE) terminal on the back of the TV.

➢ Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.

ANT2 IN (CABLE)

Connecting to a Cable Box that Descrambles All Channels

ANT IN

ANT OUT

1.Find the cable that is connected to the ANT OUT terminal on your cable box.

➢ This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

2.Connect the other end of this cable to the ANT2 IN(CABLE) terminal on the back of the TV.

ANT2 IN (CABLE)

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)

ANT IN

Incoming

cable

Splitter

1.Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.

➢This terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”.

2.Connect this cable to a two-way splitter.

Incoming

cableSplitter

Cable Box

3.Connect an Antenna cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box.

Incoming

cable

Splitter

Cable Box

RF (A/B)

Switch

4.Connect an Antenna cable between the ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.

Incoming

cable

Splitter

 

RF (A/B)

Cable Box

Switch

5.Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

TV Rear

Incoming

 

ANT2 IN(CABLE)

cable

 

Splitter

 

 

RF (A/B)

 

 

Cable Box

Switch

6.Connect the last Antenna cable between the OUT terminal on the RF (A/B) switch and the ANT2 IN(CABLE) terminal on the rear of the TV.

After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

English-10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Owner’s Instructions Other countries English-2User Instructions Contents Accessories List of FeaturesGeneral Information Viewing the Control Panel Viewing the Connection Panel ∏ + VOL Remote ControlEnglish-8 If the remote control doesn’t work, check the following Installing Batteries in the Remote ControlConnecting VHF and UHF Antennas ConnectionsConnect this cable to a two-way splitter Connecting Cable TVCable without a Cable Box English-10Connecting a VCR Connecting an S-VHS VCRConnecting a DVD Player/Set-Top Box via DVI Connecting a CamcorderConnecting a DVD Player/Set-Top Box English-12Digital Audio OUT Optical or Coaxial terminal Connecting a DVD Player/Set-Top Box via HdmiConnecting a Digital Audio System English-13Connecting a PC Connecting an Amplifier/DVD Home TheaterEnglish-14 Turning the TV On and Off Plug & Play FeatureOperation Press the Enter button to enter the languageTV will begin memorizing all of the available channels Setting the Clock AutomaticallyClock Mode menu is automatically displayed Press the Enter buttonChanging Channels Viewing the Display Adjusting the VolumeUsing the Mute Button Viewing the MenusStoring Channels in Memory Automatic Method Selecting the Video Signal-sourceMemorizing the Channels English-19Setting Up the Remote to Operate Your VCR Setting Up Your Remote ControlSetting Up the Remote to Operate Your Cable Box Setting Up the Remote to Operate Your DVD Setting Up the Remote to Operate Your Set Top BoxRemote Control Codes Brand CodeProduct Code 007 008 009 010 000 001BD Record 005 VCR Record 012To Edit the Input Source Name To Select the SourceEnglish-25 Picture Control Using Automatic Picture Settings English-26Digital Noise Reduction Resetting the Picture Settings to the Factory DefaultsEnglish-27 Changing the Screen Size English-28DNIe Digital Natural Image engine Selecting the Film ModeSetting the Blue Screen Mode English-29Activating Picture-in-Picture Selecting a Signal Source External A/V for PIPViewing Picture-in-Picture Press the Menu button to display the menuChanging the Size of the PIP Window Swapping the Contents of the PIP and Main PictureFreezing the Current Picture Changing the Position of the PIP WindowSound Control Using Automatic Sound SettingsResetting the Equalizer Settings to the Factory Defaults Customizing the SoundPreferred Language Setting the TruSurround XTChoosing a Multi-Channel Sound MTS track Digital English-33Choosing a Multi-Channel Sound MTS track Analog Automatic Volume ControlReduces the difference in volume level among broadcasters Multi-Track SoundListening to the Sound of the Sub PIP Picture Setting the On/Off MelodySelecting the Internal Mute English-35Adding and Erasing Channels Channel ControlSelecting the Antenna English-36You can set channels you watch frequently as favorites To set-up Your Favorite ChannelsEnglish-37 Viewing the Channel Lists Setting the Default Channel List ModeEnglish-38 Fine Tuning Analog Channels Labeling ChannelsLNA Low Noise Amplifier Checking the Digital-Signal StrengthEnglish-40 PC Display Using Your TV as a Computer PC DisplaySetting Up Your PC Software Based on Windows XP English-41Adjusting the Screen Quality Setting up the TV with your PCHow to Auto Adjust Press the Enter button to select Image LockChanging the Screen Position English-43Setting the Time Time SettingEnglish-44 Press the Enter button to select Clock Option 2 Setting the Clock AutomaticallyEnglish-45 To cancel the set sleep timer Setting the On/Off TimerSetting the Sleep Timer Auto Power OffSelecting a Menu Language Using the Game ModeFunction Description English-47Press the Enter button to select Caption Viewing Closed Captions On-Screen Text Messages DigitalDigital Captions function operates on digital channels English-48Viewing Closed Captions On-Screen Text Messages Analog Default is CC1English-49 Menu Transparency Level Using the Energy Saving FeatureAdjusts the transparency of the menu screen English-50English-51 Preventing Screen Burn-inReducing the Effects of Screen Burn TimeminDisplays help on the menu functions Setting the Function HelpSetting the Blue Eye English-52Displaying CableCARD related information Using CableCARDEnglish-53 Press the Enter button to select CableCARDTM Reset Using the CableCARD Setup FunctionCableCARD Reset Channel List ReorganizationV-Chip screen will appear Using the V-ChipSetting Up Your Personal ID Number PIN Your PIN has been memorized. Press the Exit button to exitHow to Set up Restrictions Using TV Parental Guidelines How to Enable/Disable the V-ChipEnglish-56 English-57 HowT V to Set up Restrictions Using ‘Canadian English’ English-58How to Set up Restrictions Using ‘Canadian French’ English-59Using the V-Chip for Digital channels English-60Using the Wiselink Mode Using the Wiselink FunctionEnglish-61 Viewing a Slide Show Using the Photo Jpeg ListEnglish-62 Background Music Background Music SettingSpeed ListZooming-In RotatingIcon Current OSD Function Printing the Photo Image English-65‘Stop’ text appears at the top Using the Music MP3 ListEnglish-66 You can remove any files saved on a memory device Copying Files to Other Memory DeviceDeleting Files from a Memory Device English-67Slide Show Effect Using the Setup MenuSlide Show Speed Slide Show RepeatScreen Saver Music RepeatEnglish-69 Appendix Identifying ProblemsEnglish-70 How to assemble the Wall Mount Bracket Wall Installation InstructionsInstallation Notes English-71Connecting External Devices to the PDP How to Adjust Mounting AngleEnglish-72 20 ~ How to assemble the Stand-BaseSpecifications English-73Jack Panel Detail 2 1/4H x 18 3/4W @ 5 3/4 UP from Bottom Dimensions HP-S4273English-74 Dimensions HP-S5073 English-75Contact Samsung WORLD-WIDE
Top Page Image Contents