Samsung HP-S4273 English-72, How to Adjust Mounting Angle, Connecting External Devices to the PDP

Page 72

3.Tighten the screws of the plastic hanger (shown in picture 2) to the back side of the PDP.

4.Remove the Safety Pins. Fasten the 4 plastic latches assembled at step (#) on the back side of the PDP using the guide holes of the wall mount, push (!) and hook (@) down to secure the PDP on the wall mount as illustrated. Secure the PDP by inserting the Safety Pins.

PDP

Wall Bracket Wall

How to Adjust Mounting Angle

Note: Please secure the mounting bracket on the wall surface after setting its angle at 0°

1.Secure the SET to the wall mount bracket. (Please refer to the following instructions.)

2.Set the angle by pulling the upper end of the SET attached to bracket in the direction of the arrow.

(Refer to the illustration on the right.)

3.The angle can be adjusted from 0° to 15° by ±2°.

Hold onto the middle of the PDP to adjust the angle (not the sides of the PDP).

Connecting External Devices to the PDP

Note: To connect external devices such as a DVD or a Home Theater System to the PDP, please refer to following instructions:

1.Be sure to remove the safety pins underneath the PDP.

Note: If the safety pins are not removed, the angle cannot be adjusted. Any attempt to do so may cause damage to the PDP.

2.Hold onto the bottom of the PDP and pull forward fully as directed by the arrow as illustrated) to adjust the angle. (0°~20° by 2°) Insert the Safety Pins to the front guide holes on both sides as illustrated in figure @.

Note: Viewing the PDP after connecting the external devices Remove the Safety Pins to adjust the angle to 0°, and then secure the Safety Pins again.

For safety, be sure to secure the PDP using the safety pins. If the safety pins are not used, the PDP may fall, causing serious injury.

English-72

Image 72
Contents Owner’s Instructions Other countries English-2User Instructions Contents List of Features AccessoriesGeneral Information Viewing the Control Panel Viewing the Connection Panel Remote Control ∏ + VOLEnglish-8 Installing Batteries in the Remote Control Connecting VHF and UHF AntennasIf the remote control doesn’t work, check the following ConnectionsConnecting Cable TV Cable without a Cable BoxConnect this cable to a two-way splitter English-10Connecting a VCR Connecting an S-VHS VCRConnecting a Camcorder Connecting a DVD Player/Set-Top BoxConnecting a DVD Player/Set-Top Box via DVI English-12Connecting a DVD Player/Set-Top Box via Hdmi Connecting a Digital Audio SystemDigital Audio OUT Optical or Coaxial terminal English-13Connecting an Amplifier/DVD Home Theater Connecting a PCEnglish-14 Plug & Play Feature OperationTurning the TV On and Off Press the Enter button to enter the languageSetting the Clock Automatically Clock Mode menu is automatically displayedTV will begin memorizing all of the available channels Press the Enter buttonChanging Channels Adjusting the Volume Using the Mute ButtonViewing the Display Viewing the MenusSelecting the Video Signal-source Memorizing the ChannelsStoring Channels in Memory Automatic Method English-19Setting Up Your Remote Control Setting Up the Remote to Operate Your VCRSetting Up the Remote to Operate Your Cable Box Setting Up the Remote to Operate Your DVD Setting Up the Remote to Operate Your Set Top BoxRemote Control Codes Brand CodeProduct Code 000 001 BD Record 005007 008 009 010 VCR Record 012To Select the Source To Edit the Input Source NameEnglish-25 Picture Control Using Automatic Picture Settings English-26Resetting the Picture Settings to the Factory Defaults Digital Noise ReductionEnglish-27 Changing the Screen Size English-28Selecting the Film Mode Setting the Blue Screen ModeDNIe Digital Natural Image engine English-29Selecting a Signal Source External A/V for PIP Viewing Picture-in-PictureActivating Picture-in-Picture Press the Menu button to display the menuSwapping the Contents of the PIP and Main Picture Freezing the Current PictureChanging the Size of the PIP Window Changing the Position of the PIP WindowUsing Automatic Sound Settings Resetting the Equalizer Settings to the Factory DefaultsSound Control Customizing the SoundSetting the TruSurround XT Choosing a Multi-Channel Sound MTS track DigitalPreferred Language English-33Automatic Volume Control Reduces the difference in volume level among broadcastersChoosing a Multi-Channel Sound MTS track Analog Multi-Track SoundSetting the On/Off Melody Selecting the Internal MuteListening to the Sound of the Sub PIP Picture English-35Channel Control Selecting the AntennaAdding and Erasing Channels English-36To set-up Your Favorite Channels You can set channels you watch frequently as favoritesEnglish-37 Setting the Default Channel List Mode Viewing the Channel ListsEnglish-38 Fine Tuning Analog Channels Labeling ChannelsChecking the Digital-Signal Strength LNA Low Noise AmplifierEnglish-40 Using Your TV as a Computer PC Display Setting Up Your PC Software Based on Windows XPPC Display English-41Setting up the TV with your PC How to Auto AdjustAdjusting the Screen Quality Press the Enter button to select Image LockChanging the Screen Position English-43Time Setting Setting the TimeEnglish-44 Option 2 Setting the Clock Automatically Press the Enter button to select ClockEnglish-45 Setting the On/Off Timer Setting the Sleep TimerTo cancel the set sleep timer Auto Power OffUsing the Game Mode Function DescriptionSelecting a Menu Language English-47Viewing Closed Captions On-Screen Text Messages Digital Digital Captions function operates on digital channelsPress the Enter button to select Caption English-48Default is CC1 Viewing Closed Captions On-Screen Text Messages AnalogEnglish-49 Using the Energy Saving Feature Adjusts the transparency of the menu screenMenu Transparency Level English-50Preventing Screen Burn-in Reducing the Effects of Screen BurnEnglish-51 TimeminSetting the Function Help Setting the Blue EyeDisplays help on the menu functions English-52Using CableCARD Displaying CableCARD related informationEnglish-53 Using the CableCARD Setup Function CableCARD ResetPress the Enter button to select CableCARDTM Reset Channel List ReorganizationUsing the V-Chip Setting Up Your Personal ID Number PINV-Chip screen will appear Your PIN has been memorized. Press the Exit button to exitHow to Enable/Disable the V-Chip How to Set up Restrictions Using TV Parental GuidelinesEnglish-56 English-57 HowT V to Set up Restrictions Using ‘Canadian English’ English-58How to Set up Restrictions Using ‘Canadian French’ English-59Using the V-Chip for Digital channels English-60Using the Wiselink Function Using the Wiselink ModeEnglish-61 Using the Photo Jpeg List Viewing a Slide ShowEnglish-62 Background Music Setting SpeedBackground Music ListRotating Zooming-InIcon Current OSD Function Printing the Photo Image English-65Using the Music MP3 List ‘Stop’ text appears at the topEnglish-66 Copying Files to Other Memory Device Deleting Files from a Memory DeviceYou can remove any files saved on a memory device English-67Using the Setup Menu Slide Show SpeedSlide Show Effect Slide Show RepeatMusic Repeat Screen SaverEnglish-69 Identifying Problems AppendixEnglish-70 Wall Installation Instructions Installation NotesHow to assemble the Wall Mount Bracket English-71How to Adjust Mounting Angle Connecting External Devices to the PDPEnglish-72 How to assemble the Stand-Base Specifications20 ~ English-73Dimensions HP-S4273 Jack Panel Detail 2 1/4H x 18 3/4W @ 5 3/4 UP from BottomEnglish-74 Dimensions HP-S5073 English-75Contact Samsung WORLD-WIDE