Samsung BN68-01415A-00 What is Anynet+?, Connecting Anynet+ Devices, To connect to Home Theater

Page 39

What is Anynet+?

Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling all connected AV devices through the Anynet+ menu when Samsung Electronics AV devices are connected.

Connecting Anynet+ Devices

The Anynet+ system supports AV devices supporting Anynet+ only.

Check if there is an Anynet+ mark on the AV device to be connected to the TV.

To directly connect to TV


TV	Anynet+ Device 1		Anynet+ Device 2		Anynet+ Device 3
	Anynet+ Device 1		Anynet+ Device 2		Anynet+ Device 3
	HDMI 1.3 Cable	HDMI 1.3 Cable		HDMI 1.3 Cable
		HDMI 1.3 Cable

Connect the [HDMI 1], [HDMI 2] or [HDMI 3] jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using the HDMI cable.

To connect to Home Theater

TV
Anynet+ Device 1		Anynet+ Device 2
HDMI 1.3 Cable	HDMI 1.3 Cable
	HDMI 1.3 Cable
Home Theatre		Anynet+ Device 3
HDMI 1.3 Cable		HDMI 1.3 Cable
		HDMI 1.3 Cable

1.Connect the [HDMI 1], [HDMI 2] or [HDMI 3] jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using the HDMI cable.

2.Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using the HDMI cable.

➣Connect only one receiver.

➣You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions.

➣Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.

➣Anynet+ supports up to 8 AV devices in total.

English - 37

Image 39

Contents Country Customer Care Centre Web Site Precautions When Displaying a Still Image Contents List of Parts Installing the StandInstalling the Wall Mount Kit Owner’s Instructions Warranty cardViewing the Control Panel Connect to the video and audio output jack on your PC Connecting External A/V Devices AVViewing the Connection Panel PC in PC / AudioHeadphones jack Video or Video / R-AUDIO-LKensington Lock depending on the model Viewing the Remote Control Displays the main on- screen menuTeletext Functions Mains lead is attached to the rear of your set Installing Batteries in the Remote ControlSwitching On and Off Placing Your Television in Standby ModeUsing the Tools Button Viewing the MenusPress the or button to select a menu Plug & Play Press the Power button on the remote controlStoring Channels Automatically If you want to reset this featurePress the or button to select the required colour standard Channel modeStoring Channels Manually Colour System Auto/PAL/SECAM/NTSC4.43/NTSC3.58Adding channels Adding / Locking ChannelsThen Sorting the Stored ChannelsAssigning Channels Names Enter button Press the or button to select Sort, then pressFine Tuning Channel Reception Press the Exit or Tools button to exit Press the Enter button again, to select ModeEasy Setting Changing the Picture StandardBlack Adjust Off/Low/Medium/High Adjusting the Custom PictureConfiguring Detailed Settings on the Picture You can set detailed picture settingsResetting the Picture Settings to the Factory Defaults Configuring Picture Option EnterSize 169/Wide Zoom/Zoom/43/Just Scan Hdmi Black Level Normal/Low Blue Only Mode Off/OnDigital NR Off/Low/Medium/High/Auto DNIe Off/ Demo/OnViewing the Picture In Picture PIP SRS TS XT Off/On Sound FeaturesMode Standard/Music/Movie/Speech/Custom Auto Volume Off/OnConnecting Headphones Sold separately Selecting the Sound ModeEnter button Setting and Displaying the Current TimeSetting the Sleep Timer PressSwitching the Television On and Off Automatically Auto Power OffChoosing Your Language Melody does not play TV power on/off melody sound can be adjustedMelody / Entertainment / Energy Saving Melody Off/Low/Medium/HighHigh or Auto Press the Exit or Tools button to exit Energy Saving Off/Low/Medium/High/AutoEditing the Input Source Names Selecting the SourceHDMI/DVI Input Setting up Your PC Software Based on Windows XPDisplay Modes Sub InputImage Reset Setting up the TV with your PCPress the Source button to select PC mode Auto AdjustmentUsing the Wiselink Function Memory Device, then press the Enter button Using the Wiselink MenuUsing the Remote Control Button in Wiselink Menu Operations Input, then press the Enter buttonViewing a Slide Show Using the Photo Jpeg ListFolder icon Photo icon Using the Menu during a Slide Show Slide Show SpeedSuch as the resolution File Size Date modified ListRotate Using the Option MenuStart Slide Show ZoomMusic function information icon Using the MP3 ListUsing the Option Menu Play Repeat MusicScreen Saver Using the Setup MenuBackground Music Setting Background MusicWhat is Anynet+? Connecting Anynet+ DevicesTo connect to Home Theater Setting Up Anynet+ Select Setup, then press the Enter button Scanning and Switching between Anynet+ DevicesMenu on Device SetupSelect Device RecordPress the Tools button. Then Press the Enter button to You can make a recording of a TV programme using a recorderRecording Listening through a ReceiverSymptom Solution Check Points before Requesting ServiceTeletext Feature English Remembering the Position Adjust to the desired position using the ,,, buttonsAuto Wall-Mount Sold separately Entering the menuMoving to the remembered position Using the Anti-Theft Kensington Lock depending on the modelTroubleshooting Before Contacting Service Personnel Technical and Environmental Specifications This page is intentionally Left blank