Samsung BN68-01415A-00 user manual Recording, Listening through a Receiver

Page 43

Recording

You can make a recording of a TV programme using a recorder.

Press the button.

Recording begins. (Only when the Anynet+ enabled recording device is connected.)

➣The current TV programme is recorded in the Watching TV status. If you are watching video from another device, the video from the device is recorded.

➣You can also record the source streams by selecting Record after pressing the TOOLS button.

➣Before recording, check whether the antenna jack is properly connected to the recording device. For the antenna connection to the recording device, refer to its user manual.

Listening through a Receiver

You can listen to sound through a receiver instead of the TV speaker.

1.Press the TOOLS button. Then Press the ENTER button to

select "Anynet+(HDMI-CEC)".		TV	P9
Press the ▲ or ▼ button to select "Receiver", then press the			View TV
ENTER	button.		Select Device		
2. Press the ◄ or ► button to select to "On", then press the			Record		
ENTER	button.		Menu on Device		
Now you can listen to sound through the receiver.			Device Operation		
3. Press the EXIT button to exit.			Receiver	:Off	
➣ When the receiver is set to On, you can listen to the TV sound			Setup		
			Move	Enter
through the 2-channel receiver.			Move	Enter
through the 2-channel receiver.			Return
➣ If the receiver is exclusively for a home theatre only			Return
➣ If the receiver is exclusively for a home theatre only
(supporting audio only), it may not appear in the device list.

➣In case of a content with copyright problem, listening through the receiver may not properly operate.

➣If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the power cord or a power failure), the “TV Speaker” may be set to “Off” when you turn the TV on again. (see page 22)

English - 41

Image 43

Contents Country Customer Care Centre Web Site Precautions When Displaying a Still Image Contents List of Parts Installing the StandInstalling the Wall Mount Kit Owner’s Instructions Warranty cardViewing the Control Panel Connect to the video and audio output jack on your PC Connecting External A/V Devices AVViewing the Connection Panel PC in PC / AudioVideo or Video / R-AUDIO-L Headphones jackKensington Lock depending on the model Displays the main on- screen menu Viewing the Remote ControlTeletext Functions Mains lead is attached to the rear of your set Installing Batteries in the Remote ControlSwitching On and Off Placing Your Television in Standby ModeViewing the Menus Using the Tools ButtonPress the or button to select a menu Plug & Play Press the Power button on the remote controlStoring Channels Automatically If you want to reset this featurePress the or button to select the required colour standard Channel modeStoring Channels Manually Colour System Auto/PAL/SECAM/NTSC4.43/NTSC3.58Adding channels Adding / Locking ChannelsThen Sorting the Stored ChannelsAssigning Channels Names Enter button Press the or button to select Sort, then pressFine Tuning Channel Reception Press the Exit or Tools button to exit Press the Enter button again, to select ModeEasy Setting Changing the Picture StandardBlack Adjust Off/Low/Medium/High Adjusting the Custom PictureConfiguring Detailed Settings on the Picture You can set detailed picture settingsResetting the Picture Settings to the Factory Defaults Enter Configuring Picture OptionSize 169/Wide Zoom/Zoom/43/Just Scan Hdmi Black Level Normal/Low Blue Only Mode Off/OnDigital NR Off/Low/Medium/High/Auto DNIe Off/ Demo/OnViewing the Picture In Picture PIP SRS TS XT Off/On Sound FeaturesMode Standard/Music/Movie/Speech/Custom Auto Volume Off/OnConnecting Headphones Sold separately Selecting the Sound ModeEnter button Setting and Displaying the Current TimeSetting the Sleep Timer PressAuto Power Off Switching the Television On and Off AutomaticallyChoosing Your Language Melody does not play TV power on/off melody sound can be adjustedMelody / Entertainment / Energy Saving Melody Off/Low/Medium/HighHigh or Auto Press the Exit or Tools button to exit Energy Saving Off/Low/Medium/High/AutoEditing the Input Source Names Selecting the SourceHDMI/DVI Input Setting up Your PC Software Based on Windows XPDisplay Modes Sub InputImage Reset Setting up the TV with your PCPress the Source button to select PC mode Auto AdjustmentUsing the Wiselink Function Memory Device, then press the Enter button Using the Wiselink MenuUsing the Remote Control Button in Wiselink Menu Operations Input, then press the Enter buttonViewing a Slide Show Using the Photo Jpeg ListFolder icon Photo icon Using the Menu during a Slide Show Slide Show SpeedSuch as the resolution File Size Date modified ListRotate Using the Option MenuStart Slide Show ZoomMusic function information icon Using the MP3 ListUsing the Option Menu Play Repeat MusicScreen Saver Using the Setup MenuBackground Music Setting Background MusicConnecting Anynet+ Devices What is Anynet+?To connect to Home Theater Setting Up Anynet+ Select Setup, then press the Enter button Scanning and Switching between Anynet+ DevicesMenu on Device SetupSelect Device RecordPress the Tools button. Then Press the Enter button to You can make a recording of a TV programme using a recorderRecording Listening through a ReceiverSymptom Solution Check Points before Requesting ServiceTeletext Feature English Remembering the Position Adjust to the desired position using the ,,, buttonsAuto Wall-Mount Sold separately Entering the menuMoving to the remembered position Using the Anti-Theft Kensington Lock depending on the modelTroubleshooting Before Contacting Service Personnel Technical and Environmental Specifications This page is intentionally Left blank