Samsung HG46NB678FFXZA installation manual Menu Items, Mode, 100, Menu OSD

¦¦ Menu Items

To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order.

To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any changes you made are saved.

Menu	Item	initial Value		Description
Hospitality	Hospitality		Select Hospitality mode.
		Interactive	yy	Interactive mode : TV works with an SI STB or SBB.
Mode	Mode
			yy	Stand-alone mode : TV works alone, without an SI STB or SBB.
			yy	Interactive mode : Samsung / OCC / MTI / Nstreams / NXTV / Enseo / Cardinal /
SI Vendor	SI Vendor	EBL		Guestek / Seachange / EBL
			yy	Stand-alone mode : OFF / Smoovie
			Set the default values that will be applied when the TV is turned on.
	Power On		yy	User Defined : Lets you set Power On Channel and Channel Type manually. See
		Last Saved		Power On Channel and Channel Type below.
	Channel EN
			yy	Last Saved : If you select this item, when the TV is turned on, it displays the channel it
				was displaying when it was turned off.
	Power On	3	When the TV is turned on, it switches automatically to this channel.
	Channel
	Channel Type	...	yy	Select channel band : AIR (analog air band), DTV (digital air band), CATV (analog cable
				band), CDTV (digital cable band).
	Power On		yy	User Defined : Lets you set the Power On Volume manually. See Power On Volume
		Last Saved		below.
	Volume EN		yy	Last Saved : When the TV is turned on, it returns to the volume that had been set
				when the power had been turned off.
	Power On	...	The TV turns on with this Volume Level in Stand Alone Hospitality mode.
	Volume
Power On
	Min Volume	0	The minimum Volume Level the user can set in Stand Alone Hospitality mode.
	Max Volume	100	The maximum Volume Level the user in Stand Alone Hospitality mode.
			Turning the front panel (local key) operations on/off.
	Panel Button		yy	Unlock : Unlocks all panel keys.
		Unlock	yy	Lock : Locks all panel keys.
	Lock
			yy	Power : Locks all panel buttons except Power.
			yy	Menu/Source : Locks the Menu and Source.
	Power On	TV	Select the input source the TV displays when turns on.
	Source
			Determines the TV's state when power returns after a power failure or after you have unplugged
	Power On		the TV and then plugged it in again.
		Last Option	yy LAST OPT : Returns to its last Power state. If it was in Stand-by, it returns to Stand-
	Option			by. If it was on, it turns on.
			yy Power On : When the power returns, the TV turns on.
			yy Standby : When the power returns, the TV enters the Standby mode.
	Channel		Gives you direct, immediate access to some of the Channel menu functions on the user Channel
	Setup		menu such as Auto Program, Antenna selection, etc.
			The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor
			you can:
			yy Change the channel numbers and names, and sort the channels in your desired
				channel number order.
	Channel Editor		yy Apply the video mute to channels you select. The video mute blanks out the video
				from a channel and outputs only the sound while displaying a speaker icon on the
Channel				screen.
			The Channel Editor also lets you view information about each channel easily, without your having
			to display each channel directly.
	Channel Bank		If you set Hospitality Mode to Standalone and SI Vendor to Smoovie, this item is displayed. Lets
	Editor		you edit the channel bank that works with the Smoovie Remote. Refer to page 29.
			yy On : Check the DTV Program channel number. (If Dynamic SI is On, it is not availale to
	Dynamic SI	ON		edit DTV channels in Channel Editor.)
			yy Off : Does not check the DTV Program channel number. (If Dynamic SI is Off, it is
				available to edit DTV channels in Channel Editor,but additional DTV channel program
				number update is not supported.)
	Picture Menu	OFF	Enable or disable the Picture Menu.
Menu OSD	Lock
	Menu Display	ON	yy On : The Main Menu is displayed.
			yy Off : The Main Menu is not displayed.

English 17