Samsung BN68-02540B-04, LC530-ZC user manual Advanced Settings, Changing the Picture Options

Do not watch in 4:3 format for a long time, traces of borders displayed on the left, right and center of the screen may cause image retention(screen burn) which are not covered by the warranty.

Basic Features

¦¦ Changing the Picture Options

Advanced Settings

OO MENUm→ Picture → Advanced Settings →

ENTERE

(available in Standard / Movie mode)

Compared to previous models, new Samsung TVs have a more precise picture.

✎✎In PC mode, you can only make changes to Dynamic Contrast, Gamma and White Balance.

Advanced Settings

Black Tone	: Off	►
Dynamic Contrast	: Medium
Shadow Detail	: 0
Gamma	: 0
RGB Only Mode	: Off
Color Space	: Native
White Balance
	▼
	U Move	E Enter R Return

■■ Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the screen depth.

■■ Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast.

■■ Shadow Detail: Increase the brightness of dark images. ✎✎ Disabled under PC mode.

■■ Gamma: Adjust the primary color intensity.

■■ RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation.

■■ Color Space (Auto / Native): Adjust the range of colors available to create the image.

■■ White Balance: Adjust the color temperature for a more natural picture.

R-Offset / G-Offset / B-Offset: Adjust each color's (red, green, blue) darkness.

R-Gain / G-Gain / B-Gain : Adjust each color's (red, green, blue) brightness.

Reset: Resets the White Balance to it's default settings. ■■ Flesh Tone: Emphasize pink "flesh tone".

■■ Edge Enhancement (Off / On): Emphasize object

boundaries.

Picture Options

OO MENUm→ Picture → Picture Options →

ENTERE

✎✎In PC mode, you can only make changes to the Color Tone, Size and Auto Protection Time.

Picture Options

Color Tone	: Normal	►
Size	: 16:9
Digital Noise Filter	: Auto
MPEG Noise Filter	: Auto
HDMI Black Level	: Normal
Film Mode	: Off
Auto Protection Time	: 2 hours
	U Move E Enter	R Return

■■ Color Tone (Cool / Normal / Warm1 / Warm2)

✎✎ Warm1 or Warm2 will be deactivated when the picture mode is Dynamic.

✎✎ Settings can be adjusted and stored for each external device connected to an input on the TV.

■■ Size: Your cable box/satellite receiver may

have its own set of screen sizes as well.	P.SIZE
However, we highly recommend you use
16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide mode.

Zoom1: Use for moderate magnification.

Zoom2: Use for a stronger magnification.

Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.

4:3: Sets the picture to basic (4:3) mode.

✎✎

Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are input.

✎✎NOTE

xx After selecting Zoom1, Zoom2 or Wide Fit:

1.Press the ► button to select Position.

2.Press the ENTEREbutton.

3.Press the ▲ or ▼ button to move the picture up or down.

4.Press the ENTEREbutton.

5.Press the ► button to select Reset.

6.Press the ENTEREbutton to reset the picture to its default position.

16 English