Samsung BN68-02714E-02 setup guide Connect External Devices, Connect Power and Antenna or Cable

Quick Setup Guide

Congratulations on the purchase of your new Samsung TV.

Read this setup guide to get your TV up and running quickly.

STOP	1-800-SAMSUNG (1-800-726-7864)
	Samsung Electronics America, Inc.
Please do not return this unit.	85 Challenger Road Ridgefield Park, NJ 07660-2112
	Samsung Electronics Canada Inc.
If you have problems operating your	55 Standish Court Mississauga, Ontario L5R 4B2
TV, call:	Call Center hours of operation: Mon-Sun, 9:00 AM -12
1-800-SAMSUNG (1-800-726-7864)	AM EST.
	To register this product, visit: www.samsung.com/
For web support please visit:
	register.
www.samsung.com/support

Step 4: Connect External Devices

Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)

Use one of the connections below to connect your TV to an external A/V device. We recommend using HDMI for the highest picture quality.

✎✎When connecting to AV IN 1 on the back of your TV, attach the video cable (yellow) to the green jack next to the AV IN 1 label. The jack will not match the color of the video cable (yellow).

Best Connection

HD connection (up to 1080p)

Using an HDMI Cable

Connecting an audio device (Home Theater, etc.)

Connect your TV to your Home Theater or other	Analog Audio connection
audio device to enjoy enhanced Sound quality.
	Using an Audio Cable
	Amplifier / DVD home theater
	AUDIO IN
Audio Cable (Not Supplied)

Step 1: Install the Batteries into the Remote

To install batteries into your remote control, follow these steps:

1.Lift the cover on the back of the remote upward as shown in the figure to the

right.

2. Install two AAA batteries.

✎✎ Make sure to match the + and - ends of the batteries to the diagram in the battery compartment.

3.Replace the cover.

Step 2: Connect Power and Antenna or Cable

VHF/UHF Antenna

Antenna Cable	Connect Ant In to
(Not Supplied)
	•	Wall cable jack
	• VHF/UHF Antenna
or
	•	Cable or Satellite box

Audio Cable (Not Supplied)

Lowest Quality Connection

Audio/Video connection (480i only)

Using an Audio/Video Cable

AUDIO OUT DVD, Blu-ray player, cable box, STB satellite receiver, VCR

HDMI Cable (Not Supplied)

HDMI to DVI Cable (Not Supplied)

Audio Cable (Not Supplied)

Component Cable (Not Supplied)

Audio Cable (Not Supplied)

HDMI OUT DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver

Device

Very Good Connection

HD connection (up to 1080p) Using an HDMI to DVI Cable

DVI OUT

AUDIO OUT Device

Good Connection

Component connection (up to 1080p) Using a Component Cable

COMPONENT OUT	DVD, Blu-ray player, cable box,
	STB satellite receiver, VCR

Digital Audio connection

Using an Optical Cable

Digital Audio System

Optical Cable (Not Supplied)

OPTICAL

Connecting a PC

Connect your TV to a PC to use it as a Monitor.

HDMI to DVI Cable	HD connection
(Not Supplied)
	Using an HDMI to DVI Cable
	DVI OUT
	AUDIO OUT
Audio Cable (Not Supplied)
Audio Cable (Not Supplied)	Using a D-Sub Cable
	AUDIO OUT

Ant or Cable Out Use a 75 ohm (round) cable.

Video Cable (Not Supplied)

VIDEO OUT Device

AUDIO OUT

Device

D-Sub Cable (Not Supplied)

PC OUT

Step 3: Run Plug & Play	5	After the TV has memorized the channels, choose the Clock Mode. Select
When you turn on your TV for the first time, it automatically launches the Plug &		Auto if you have a digital channel in your area. Select Manual if you don’t, or
Play function. With Plug & Play, you can select the On Screen Display language, set		if you have a cable or satellite box. When done, press the ENTEREbutton.
the clock mode, and launch the TV’s channel memorizing process. It also displays	✎✎If you select Manual, the clock setting screen appears.
connection instructions similar to those in this guide.To navigate while Plug & Play	6
is running, press the Up, Down, Left or Right arrow buttons on your remote. To		Select the daylight savings time setting: Off or On, and then press the
make a selection, press the ENTEREbutton. To skip a screen, press the MENU
button. To turn on your TV, press the POWER button on the remote or on the TV.		ENTEREbutton.
To run Plug & Play, follow these steps:	✎✎This function is only available when the Clock Mode is set to Auto.

1 Using your remote control, select		Plug & Play			7	Select the time zone in which you live, and then press the ENTEREbutton.
the language for the On Screen	Select Language of the OSD.				8
Display (OSD), and then press			English
						After the time zone screen, The connection method for best HD screen
ENTEREbutton.	Menu Language	:	Español
2 Select Home Use, and then press			Français			quality is displayed. Press Right arrow button on your remote to view each
			UMove	EEnter		screen in succession. Press the Blue button to skip this section.
					9
the ENTEREbutton. If you						The Enjoy your TV. screen appears. Then press the ENTEREbutton.
select Store Demo, the TV will reset your picture and audio settings every 30
minutes.

3 Select Antenna Source. If Antenna Source is Air, Cable or Auto, you must	Setting the Clock
	Before you can use your TV’s On/Off Timer, you must set the clock. To set the
select your cable system type. After selecting source, select Search; then
	clock, follow these steps:
press the ENTEREbutton on your remote.
	1.	Turn on your TV, press the MENU button on your remote, then select Setup →
✎✎Most cable systems are Standard(STD) systems, If you are not sure about
		Time.
what kind of cable system you have, contact your cable company.	2.	Select Clock Mode, and then press the ENTEREbutton.
✎✎If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After
	3.	Choose Auto or Manual.
Plug & Play is complete, set your TV to Channel 3 or 4, according to the		xx If you select Auto, the current time will be set automatically using the time
directions for your cable or satellite box.
4 The TV memorizes the available channels. This process can take up to 45		from a digital channel.
		xx If you select Manual, you can set the Month, Day, Year, Hour, Minute
minutes.		and am/pm directly by pressing up, down, left and right arrow button on
		your remote.
	4.	Press the RETURN button on your remote when done.

Changing the Screen Size

Your TV has several screen size options, each designed to work best with specific types of video input. If you have a cable box or satellite receiver, it may have its own set of screen sizes as well.

To change the screen size, press the P.SIZE button on your remote. The first time you press it, your TV displays the current setting. Thereafter, each time you press the P.SIZE button, you change the size of the picture on the screen.

The following sizes are available:

16:9 Wide screen 4:3 Standard screen Wide Fit

Zoom 1 Zoom 2 Screen Fit

✎✎Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted.

Changing the Picture Mode

Your TV has four preset Picture Modes with factory adjusted settings, each designed to give you an excellent picture under specific conditions.

The Picture Modes are listed and described in the table below:

Mode	Description
Dynamic	Brightens picture. For a vibrant, enhanced image in brightly lit or
	sunny room.
Standard	For a bright, detailed picture in a normally lit room.
Natural	For a comfortable, easy-on-the-eyes picture in a normally lit room.
Movie	For a studio quality cinema picture in a dimly lit or dark room.

To change the Picture Mode, follow these steps:

1.Turn on your TV, press the TOOLS button on your remote. The Tools menu appears.

2.Using the ▲ or ▼ on your remote, select Picture Mode.

3.On the Picture Mode menu, use the ◄ or ► on your remote to select the Picture Mode you want.

4.Press the EXIT button to exit the menu.