Quick Setup Guide
Congratulations on the purchase of your new Samsung TV. Read this setup guide to get your TV up and running quickly.
STOP |
Step 2: Connect Antenna or Cable
VHF/UHF Antenna
Step 3: Connect External Devices
Connecting an AV device (DVD /
Best Connection
| Samsung Electronics America, Inc. | |
Please do not return this unit. | 85 Challenger Road Ridgefield Park, NJ | |
Samsung Electronics Canada Inc. | ||
If you have problems operating your | 55 Standish Court Mississauga, Ontario L5R 4B2 | |
TV, call: | Call Center hours of operation: | |
AM EST. | ||
To register this product, visit: www.samsung.com/ | ||
For web support please visit: | ||
register. | ||
www.samsung.com/support | ||
|
Step 1: Install the Stand
Follow the steps below to connect the TV to the stand.
✎✎NOTE
xx Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
xx Make sure that at least two persons lift and move the LED TV.
xx Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to one side.
UN19C4000, UN22C4000, UN22C4010
1 Insert the stand body into the stand base.
2 Screw the stand base to the stand 3 Slide the TV onto the stand
Connect Ant In to
Antenna Cable (Not Supplied) |
|
| ||||||
|
|
|
|
|
|
| • | Wall cable jack |
|
|
|
|
|
|
| • VHF/UHF Antenna | |
|
|
| or |
| ||||
|
|
|
| • | Cable or Satellite box | |||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| Ant or Cable Out |
Use a 75 ohm (round) cable. |
| |||||||
|
| |||||||
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
Step 4: Run Plug & Play
When you turn on your TV for the first time, it automatically launches the Plug & Play function. With Plug & Play, you can select the On Screen Display language, set the clock mode, and launch the TV’s channel memorizing process.
It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow buttons on your remote. To make a selection, press the ENTEREbutton.
To skip a screen, press the MENU button. To turn on your TV, press the POWER button on the remote or on the TV. To run Plug & Play, follow these steps:
1 Using your remote control, select | Plug & Play |
|
| |
the language for the On Screen | Select Language of the OSD. | English |
| |
Display (OSD), and then press the |
| |||
|
|
| ||
ENTEREbutton. | Menu Language | : | Español |
|
Français |
| |||
2 Select Home Use, and then |
|
|
| |
|
| UMove | EEnter | |
press the ENTEREbutton. If |
|
|
|
|
you select Store Demo, the TV | Plug & Play |
|
| |
will reset your picture and audio | Anrenna Source | : | Air |
|
settings every 30 minutes. | Digital Cable System | : |
| |
| Cable |
| ||
3 Select Antenna Source to |
|
|
| |
Analog Cable System | : | Auto |
| |
|
|
|
| |
memorize. If Antenna Source is |
| Search |
|
|
Use one of the connections below to connect your TV to an external A/V device.
We recommend using HDMI for the highest picture quality.
Audio Cable
(Not Supplied)
Component Cable
(Not Supplied)
|
|
|
| HD connection (up to 1080p) | ||
|
|
|
|
| Using an HDMI Cable | |
HDMI Cable (Not Supplied) |
| HDMI OUT |
| |||
|
|
|
|
|
| DVD / |
|
|
|
|
| Device | / HD Cable Box / HD |
|
|
|
|
| ||
|
|
|
|
| Satellite receiver (STB) | |
|
|
|
|
|
| |
| Very Good Connection |
| HD connection (up to 1080p) |
HDMI to DVI Cable (Not Supplied) | Using a HDMI to DVI Cable |
| |
| DVI OUT |
Audio Cable (Not Supplied) | Device |
| |
| AUDIO OUT |
Video Cable (Not Supplied)
Video Cable (Not Supplied)
Good Connection
Component connection (up to 1080p) | Lowest Quality Connection | |||
Using a Component Cable | Audio/Video connection (480i only) | |||
| ||||
DVD / | Using an Audio/Video Cable | |||
| ||||
COMPONENT OUT |
| AUDIO OUT | DVD / | DVD / |
| receiver / VCR | |||
VIDEO OUT |
| AUDIO OUT | Device |
|
body. |
| body. |
| E | |
| RELE |
|
| ASSE |
|
|
| LOOCK |
UN26C4000
Top view
| Screws (M4 X L12) |
|
| |
| Guide Stand | s | s | |
1 Connect the Guide Stand to the Stand |
|
| ||
|
| s | ||
|
|
| s | s |
|
|
|
| |
Stand using four screws (M4 X |
|
|
| |
L12) as shown |
|
|
|
|
| 3 |
| Rear |
|
| Fasten three screws (M4 X L8) at | |||
2 With your TV upright, connect the | position 1, and then fasten three | |||
TV to the Stand as shown. | screws (M4 X L8) at position 2. | |||
|
|
|
| s |
|
|
|
| s |
|
|
| 2 | s |
|
|
| s | |
|
|
|
| s |
s | Front |
|
|
|
s |
|
|
|
|
s | s |
|
|
|
| s |
|
|
|
Rear |
|
| 1 |
|
|
|
|
| |
Cable or Auto, you must select | UMove EEnter | |
your cable system type. After | ||
| ||
selecting source, select Search; then press the ENTEREbutton on your | ||
remote. |
| |
✎✎Most cable systems are Standard (STD) systems, If you are not sure about what kind of cable system you have, contact your cable company.
✎✎If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After Plug & Play is complete, set your TV to Channel 3 or 4, according to the directions for your cable or satellite box.
4The TV memorizes the available channels. This process can take up to 45 minutes.
5After the TV has memorized the channels, choose the Clock Mode. Select Auto if you have a digital channel in your area. Select Manual if you don’t, or if you have a cable or satellite box. When done, press the ENTEREbutton.
✎If you select Manual, the clock setting screen appears.✎
6Select the daylight savings time setting: Off or On, and then press the ENTEREbutton.
7Select the time zone in which you live, and then press the ENTEREbutton.
8After the time zone screen, The connection method for best HD screen quality is displayed. Press Right arrow button on your remote to view each screen in succession. Press the Blue button to skip this section.
9The Enjoy your TV. screen appears. Then press the ENTEREbutton.
If You Want to Rerun Plug & Play
1.Press the SOURCE button on your remote, then select TV mode.
2.Press the MENU button on your remote to display the menu.
3.Press the ▲ or ▼ button to select Setup, and then press the ENTERE button.
4.Press ENTEREagain to select Plug & Play.
Connecting an audio device (Home Theater, etc.)
Connect your TV to your Home Theater or other audio device to enjoy enhanced Sound quality.
Analog Audio connection
Using a Headphone
headphone
Digital Audio connection
Using an Optical Cable
Digital Audio System
Optical Cable (Not Supplied)
OPTICAL
Analog Audio connection
Using an Audio Cable
Amplifier / DVD home theater
Audio Cable (Not Supplied)
AUDIO IN
Digital Audio connection
Using an Optical Cable
Digital Audio System
Optical Cable (Not Supplied)
OPTICAL
Connecting a PC
Connect your TV to a PC to use it as a Monitor.
|
|
|
|
| HD connection |
HDMI to DVI Cable | Using a HDMI to DVI Cable | ||||
(Not Supplied) |
| ||||
|
|
|
|
| DVI OUT |
|
|
|
|
| |
|
|
|
|
| AUDIO OUT |
|
|
|
| Audio Cable |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
| (Not Supplied) |
|
Using a
Audio Cable
(Not Supplied)
AUDIO OUT
PC OUT
Using an
Available Devices: External devices that support