Samsung UN55C6400, UN46C6400, UN40C6500 Troubleshooting, Issues Solutions and Explanations

Page 56

Other Information

Troubleshooting

If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, visit “www.samsung.com,” then click on Support, or call Samsung customer service at 1-800-SAMSUNG.

Issues

Solutions and Explanations

Poor picture

First of all, please perform the Picture Test and confirm that your TV is properly displaying test image.

 

(go to MENU - Support - Self Diagnosis - Picture Test) (p. 24)

 

If the test image is properly displayed, the poor picture may caused by the source or signal.

 

 

The TV image does not look as good as it

• If you have an analog cable/satellite box, upgrade to an HD digital set top box. Use HDMI or

did in the store.

Component cables to deliver HD (high definition) picture quality.

 

• Cable/Satellite subscribers: Try HD stations from the channel line up.

 

• Antenna connection: Try HD stations after performing Auto program.

 

Many HD channels are upscaled from SD(Standard Definition) contents.

 

• Adjust the Cable/Sat box video output resolution to 1080i or 720p.

 

 

The picture is distorted: macroblock error,

• Compression of video contents may cause picture distortion, especially in fast moving pictures such

small block, dots, pixelization.

as sports and action movies.

 

• Low signal level can cause picture distortion. This is not a TV problem.

 

• Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analog and digital

 

TV.

 

 

Color is wrong or missing.

• If you’re using a component connection, make sure the component cables are connected to the

 

correct jacks. Incorrect or loose connections may cause color problems or a blank screen.

 

 

There is poor color or brightness.

• Adjust the Picture options in the TV menu (go to Picture mode / Color / Brightness / Sharpness)

 

(p. 16).

 

• Adjust Energy Saving option in the TV menu (go to MENU – Picture – Eco Solution –

 

Energy Saving (p. 16).

 

• Try resetting the picture to view the default picture settings (go to MENU - Picture - Picture Reset)

 

(p. 18).

 

 

There is a dotted line on the edge of the

• If the picture size is set to Screen Fit, change it to 16:9 (p. 18).

screen.

• Change cable/satellite box resolution.

 

 

The picture is black and white.

• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of

 

component input 1 on the TV.

 

 

When changing channels, the picture

• If connected with a cable box, please try to reset the cable box. (reconnect the AC cord and wait until

freezes or is distorted or delayed.

the cable box reboots. It may take up to 20 minutes).

 

• Set the output resolution of the cable box to 1080i or 720p.

 

 

Sound Problem

First of all, please perform the Sound Test to confirm that your TV audio is properly operating.

 

(go to MENU - Support - Self Diagnosis - Sound Test (p. 24).

 

If the audio is OK, the sound problem may caused by the source or signal.

 

 

There is no sound or the sound is too low

• Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.

at maximum volume.

 

 

 

The picture is good but there is no sound.

• Set the Speaker Select option to TV Speaker in the Sound menu (p. 20).

 

• If you are using an external device, make sure the audio cables are connected to the correct audio

 

input jacks on the TV.

 

• If you are using an external device, check the device’s audio output option (ex. you may need to

 

change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).

 

• If you are using a DVI to HDMI cable, a separate audio cable is required.

 

• If your TV has a headphone jack, make sure there is nothing plugged into it.

 

• Reboot the connected device by reconnecting the device’s power cable.

 

 

The speakers are making an inappropriate

• Check cable connections. Make sure a video cable is not connected to an audio input.

noise.

• For antenna or Cable connections, check the signal strength. Low signal level may cause sound

 

distortion.

 

• Perform the Sound Test as explained above.

 

 

56 English

Image 56
Contents Samsung Electronics Canada Inc., Customer Service Samsung Electronics America, Inc ChallengerSecuring the Installation Space Installation with a standInstallation with a wall-mount Still image warningContents List of Features AccessoriesCleaning Cloth BN63-01798B Component Composite AV Coaxial RFInstall the Stand Guide Stand 1EAGuide Stand RearScrews 9EA With your TV upright, connect the TV to the Stand as shownGuide Stand Rear M4 X L8Buttons on the remote control PPower Turns the TV on or off Standby modePower Indicator Speakers Remote control sensor / Power IndicatorReturns to the previous menu Viewing the Remote ControlTurns the TV on and off Power Input Connecting to an AntennaPlug & Play Initial Setup Connecting to an AV Device ConnectionsConnecting to an Audio Device Digital Audio OUT OpticalConnecting to a PC Using an HDMI/DVI Cable or a D-sub CableMode Resolution Horizontal Frequency Vertical Frequency Sync PolarityHow to Navigate Menus Source ListEdit Name Changing the Input SourceChannel List Add to Favorite / Delete from FavoriteAntenna Air / Cable t Auto ProgramOther Features Clear Scrambled ChannelProgrammed Editing ChannelsMode t Eco SolutionAdvanced Settings Fine TunePicture Options Picture OptionsOff Turns the Expert Pattern function off OO MENUm→ Picture → Picture Options →Setting up the TV with Your PC Picture Reset OK / CancelAuto Adjustment t Screen EqualizerSRS TruSurround HD Off / On t SRS TruDialog Off / OnAuto Volume Off / Normal / Night Sound Reset OK / CancelMulti-Track Sound MTS t Speaker Select External Speaker / TV SpeakerSetting the On / Off Timer TimerOO MENUm→ Setup → Time → Timer 1 → To be played when the TV is turned on automaticallyMenu Language CaptionWireless Remote Control Off / On GeneralPIP t Legal NoticeSelf Diagnosis Picture In Picture PIPSoftware Upgrade Software UpgradeBy Online Upgrade the software using the Internet HD Connection GuideConnecting to a Wired Network Network ConnectionModem Port on the Wall LAN Port on the WallNetwork Setup Auto Network Setup ManualNetwork Setup Network Type Wired Network Setup Network TestConnecting to a Wireless Network Network Setup Samsung Auto Configuration Boot upNetwork Setup PBC WPS Security Key Entered ~9 NumberNetwork Setup Ad-Hoc 04Features Advanced EnglishTo connect SWLSamsung Wireless LinkSWL connect Media Play Connecting a USB DeviceConnecting to your PC through a network Advanced Features Sorting standard is different depending on the contents VideosScreen Display Name File extension FormatYy Supported Video Formats Mbps1920x1080 Supported Lossless audioMusic List section using the Green button PhotosPlaying Multiple Files Media Play Additional FunctionsSettings Same file name as the video AudioDevice TV Rear Panel Anynet+Home Theater Anynet+ Recording Setting Up Anynet+Switching between Anynet+ Devices Troubleshooting for Anynet+ Listening through a ReceiverFeatures Screen Display Getting Started with Internet@TVInternet@TV AdvancedSetting up Internet@TV LoginDefault password set is Create Create an account and link it with desiredHow to create Internet@TV ID Using the Internet@TV service Samsung AppsSidebar Mode YahooTo install a widget, select Profile WidgetWidget Gallery Add Widget to My ProfileCheck with the service provider Troubleshooting for Internet@TVProblem Possible Solution Setup Setting Up AllShareMessage / Media / ScreenShare About AllShareMy Mobile Other Information Assembling the CablesInstalling the Wall Mount Blanking BracketAnti-theft Kensington Lock Installing the TV-Holder Securing the TV to the WallTV-Holder Kit Sold Separately TV-Holder BN96-15753ATroubleshooting Issues Solutions and Explanations05InformationOher English Degree connectors Caption must be activated on the external device pEvery time the TV is turned off Check the cable connections and reconnect themLicense Specifications Dimensions Model name UN32C6500 UN40C6500UN46C6500 UN55C6500AllShare Amplify Antenna Anynet+ Favorite Channel Film Mode Fine Tune Flesh Tone FrequencyIndex This page is intentionally Left blank