Mercury Statement
(LCD
Monitor,
LCD
TV,
DLP
Projection
TV,
Projector
for
USA
only)
Contains
Mercury,
Dispose According to Local, State or Federal Laws
Wiring
the
Mains
Power Supply
Plug(UK
Only)
IMPORTANT
NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used.
Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug.
Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows: The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire BROWN must be connected to the terminal marked with the letter Lor coloured BROWN or RED.
coloured
WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, , OR COLOURED GREEN OR GREEN AND YELLOW.
WHICH
IS
MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL