Samsung Series L6 630, BN68-03164A-01, LC630-ZA, LN55C630 Spdif Output, Sound Reset On / Off, Time

Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.

The antenna must be connected in order to set the time automatically.

This function is only available when the Clock Mode is set to Auto.

This function is only available when the Clock Mode is set to Auto.

Basic Features

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.

■■ Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.

✎✎ By connecting to 5.1ch speakers in a dolby digital setup, maximize your interactive 3D sound experience.

■■ Audio Delay: Correct audio-video mismatch, when watching TV or video, and listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).

Sound Reset (On / Off)

Reset all sound settings to the factory defaults.

Setup Menu

¦¦ Setting the Time

OO MENUm→ Setup → Time → ENTERE

Time

✎✎The current time will appear every time you press the INFO button.

■■ Clock: Setting the clock is for using various timer features of the TV.

✎✎ If you disconnect the power cord, you have to set the clock again.

Clock Mode: Set up the current time manually or automatically.

–– Auto: Set the current time automatically using the

time from a digital channel.

✎✎

–– Manual: Set the current time manually.

✎✎

Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.

✎✎ Available only when Clock Mode is set to Manual.

✎✎ You can set the month, day, year, hour and minute directly by pressing the number buttons on the remote control.

DST (Off / On): Switches the DST(Daylight Saving Time)

function on or off.

✎✎

Time Zone: Select your time zone.

✎✎

¦¦ Using the Sleep Timer

OO MENUm→ Setup → Time → Sleep Timer →

ENTERE

■■ Sleep Timer t: Automatically	SLEEP
shuts off the TV after a preset period
of time. (30, 60, 90, 120, 150 and 180
minutes).

✎✎ To cancel the Sleep Timer, select Off.

¦¦ Setting the On/Off Timer

OO MENUm→ Setup → Time → Timer 1 →

ENTERE

■■ Timer 1 / Timer 2 / Timer 3: Three different on / off timer settings can be made. You must set the clock first.

Timer 1

On Time

▲	12		00					am
Inactivate
▼
Off Time
Inactivate	12		00					am
Volume	Source		Antenna				Channel
10		TV		Air			3
Repeat	Sun Mon		Tue		Wed Thu			Fri Sat
Once
	L Move UAdjust					E Enter R Return

On Time / Off Time: Set the hour, minute, am/pm and activate/inactivate. (To activate the timer with the setting you have chosen, set to Activate.)

Volume: Set the desired volume level.

Source: Select TV or USB content to be played when the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV)

Antenna (when the Source is set to TV): Select Air or Cable.

18 English