Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically. ✎✎Connecting the mains and antenna.
VHF/UHF Antenna
orCable
ANT OUT
Power Input
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of
✎✎To return to the previous step, press the red button.
Started01 Getting
1 | Selecting a language |
2 | Selecting Store Demo |
or Home Use |
3 | Selecting an antenna |
4 | Selecting a channel |
5 | ModeSetting the Clock |
6 | Viewing the HD |
Connection Guide | |
7 | Enjoy your TV. |
Press the ▲ or ▼ button, then press the ENTEREbutton. | POWER |
Select the desired OSD (On Screen Display) language. | P |
Press the ◄ or ► button, then press the ENTEREbutton. | |
yy Select the Home Use mode. Store Demo Mode is for retail | |
environments. |
yy To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold MENU for 5 sec.
Press the ▲ or ▼ button, then press the ENTEREbutton. Select Air, Cable or Auto.
✎✎In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ► button, then press the ENTEREbutton.
The channel search will start automatically.
For more information, refer to Channel → Auto Program. (P. 12)
✎✎Press the ENTEREbutton at any time to interrupt the memorization process. Set the Clock Mode automatically or manually.
✎✎If you select the Auto, set the daylight saving time. Select the time zone which you live.
The connection method for the best HD screen quality is displayed.
Press the ENTEREbutton.
If You Want to Reset This Feature...
OO MENUm→ Setup → Plug & Play → ENTERE
Setup
Plug & Play |
|
Time |
|
Menu Language | : English |
Caption | : On |
Security |
|
Network |
|
General |
|
PIP | : Off |