Samsung LTN 1735, LTN 1535 manual Connecting to a Cable Box that Descrambles All Channels

Page 15

01-12_EN 6/26/03 2:41 PM Page 8

I N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is connected to the

ANTENNA OUT terminal on your cable box.

This terminal might be labeled “ANT OUT”, “VHF OUT”, or simply, “OUT”.

2

Connect the other end of this cable to the TV ANTENNA terminal on the back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

This terminal might be labeled “ANT IN”, “VHF IN”, or simply, “IN”.

2

Connect this cable to a two-way splitter.

3

Connect a coaxial cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box.

English-8

Image 15

Contents LTN 1535 LTN Thank You for Choosing Samsung Safety+ContentsEN 6/26/03 240 PM Risk of Electric Shock do not Open FCC Information Operation InstallationSpecial Features Your New TVAppendix TroubleshootingList of Parts List of FeaturesFamiliarizing Yourself with Your New TV Top ButtonsVOL + Rear Panel Jacks VOL+ and VOL Remote Control+100 CH and CH Channel Up/DownRemote control doesn’t work Installing Batteries in the Remote ControlAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasCable without a Cable Box Connecting Cable TVAntennas with 75-ohm Round Leads Separate VHF and UHF AntennasConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsEnglish-9 Connecting a VCR Connecting an S-VHS VCR Component Connecting a DVD PlayerChanging Channels Using the Channel ButtonsUsing the PRE-CH Button to select the Previous Channel Turning the TV On and OffAdjusting the Volume Using MuteViewing the Display UP/DOWN buttons to select Air, then press Plug & Play FeatureSelecting the Video Signal-source Memorizing the ChannelsUP/DOWN buttons to select Storing Channels in Memory Automatic Method To check the channels stored in memoryTo select channels over To Select TV/Input ADD and DEL Channels Manual Method2Alternate method UP/DOWN buttons to select Edit Name, then To Edit the Input Source NameAlternate method Using Automatic Picture SettingsCustomizing the Picture UP/DOWN buttons repeatedly to select the Standard Using Automatic Sound SettingsUP/DOWN buttons to select Language Selecting a Menu LanguageSetting the Blue Screen Mode Fine Tuning Channels Freezing the Picture Changing the Screen SizeUP/DOWN buttons to select Color Tone Adjusting the Color ToneUP/DOWN buttons to select MTS, then press the Enter button To select the Sound optionSetting the Clock UP/DOWN buttons three timesUP/DOWN buttons repeatedly until the correct hour appears Setting the On/Off Timer UP/DOWN buttons to select Off Time Auto Power OffSetting the On/Off Timer Using the Menu Setting the Sleep TimerUsing the V-Chip Setting Up Your Personal ID Number PinUP/DOWN buttons to select Change Pin How to Enable/Disable the V-Chip How to Set up Restrictions Using the TV guidelinesUP/DOWN buttons to select On. Pressing TV-Y UP/DOWN buttons to select Setup, then press NC-17No children under age Adults only NR Not rated Chapter Five Identifying ProblemsAttaching a Wall or Arm mounting device Unplug the monitor from the power outlet before cleaningInstalling Vesa compliant mounting devices Mounting padRear cover Retractable Stand Using the Anti-Theft Kensington LockUsing Your TV in Another Country Cleaning and Maintaining Your TVModel Name LTN1535 LTN1735 Specifications