Samsung LTN 1735, LTN 1535 manual Connecting a VCR

Page 17

01-12_EN 6/26/03 2:41 PM Page 10

I N S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6-8).

Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Unplug the cable or antenna from the back of the TV.

2

Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR.

3

Connect a coaxial cable between the

ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

4

Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV.

If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left and right audio input jacks of the TV. If your VCR is stereo, you must connect two cables.

5

Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV.

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

# Each external input source device has a different back panel configuration.

English-10

Image 17

Contents LTN 1535 LTN Thank You for Choosing Samsung Safety+ContentsEN 6/26/03 240 PM Risk of Electric Shock do not Open FCC Information Special Features InstallationYour New TV OperationAppendix TroubleshootingList of Parts List of FeaturesVOL + Familiarizing Yourself with Your New TVTop Buttons Rear Panel Jacks +100 Remote ControlCH and CH Channel Up/Down VOL+ and VOLRemote control doesn’t work Installing Batteries in the Remote ControlAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasAntennas with 75-ohm Round Leads Connecting Cable TVSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsEnglish-9 Connecting a VCR Connecting an S-VHS VCR Component Connecting a DVD PlayerUsing the PRE-CH Button to select the Previous Channel Using the Channel ButtonsTurning the TV On and Off Changing ChannelsViewing the Display Adjusting the VolumeUsing Mute UP/DOWN buttons to select Air, then press Plug & Play FeatureUP/DOWN buttons to select Selecting the Video Signal-sourceMemorizing the Channels To select channels over Storing Channels in Memory Automatic MethodTo check the channels stored in memory 2Alternate method To Select TV/InputADD and DEL Channels Manual Method UP/DOWN buttons to select Edit Name, then To Edit the Input Source NameAlternate method Using Automatic Picture SettingsCustomizing the Picture UP/DOWN buttons repeatedly to select the Standard Using Automatic Sound SettingsUP/DOWN buttons to select Language Selecting a Menu LanguageSetting the Blue Screen Mode Fine Tuning Channels Freezing the Picture Changing the Screen SizeUP/DOWN buttons to select Color Tone Adjusting the Color ToneUP/DOWN buttons to select MTS, then press the Enter button To select the Sound optionUP/DOWN buttons repeatedly until the correct hour appears Setting the ClockUP/DOWN buttons three times Setting the On/Off Timer UP/DOWN buttons to select Off Time Auto Power OffSetting the On/Off Timer Using the Menu Setting the Sleep TimerUP/DOWN buttons to select Change Pin Using the V-ChipSetting Up Your Personal ID Number Pin UP/DOWN buttons to select On. Pressing How to Enable/Disable the V-ChipHow to Set up Restrictions Using the TV guidelines TV-Y UP/DOWN buttons to select Setup, then press NC-17No children under age Adults only NR Not rated Chapter Five Identifying ProblemsAttaching a Wall or Arm mounting device Unplug the monitor from the power outlet before cleaningRear cover Installing Vesa compliant mounting devicesMounting pad Retractable Stand Using the Anti-Theft Kensington LockUsing Your TV in Another Country Cleaning and Maintaining Your TVModel Name LTN1535 LTN1735 Specifications