Samsung LN-S1951W Storing Channels Automatically, Storing Channels Manually, Fine Tuning Channels

Storing Channels Automatically

Channel

Air/Cable : Air

Auto Program

Add/Delete

Fine Tune

Move Enter Return

Storing Channels Manually

The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes.

1.To select the signal source, follow the “Selecting the Video Signal-source” instructions numbers 1 to 3 on page 12.

2. Press the or button to select “Auto Program”, then press the ENTER button.

3.Press the ENTER button to select “Start”.

The channel search will start and end automatically.

Press the ENTER button at any time to interrupt the memorization process and return to the “Channel” menu.

4.After all the available channels are stored, the “Channel” menu reappears.

5.Press the EXIT button to exit.

Press the AUTO PROG. button on the remote control.

Channel

Air/Cable : Air

Auto Program

Add/Delete

Fine Tune

Move	Enter	Return
Add/Delete
Air	8
	1/5
Ch.
Air	8
Air	9
Air	10
Air	11
Air	12
Air	13
Air	14
Air	15
Air	16
Air	17
Air	18
Air	19
Air	20
Air	21
Air	22
Add
Page	Return
Move	Enter

Set the channels according to your preference. You can easily delete or add the channels you want.

1.Use the number buttons to directly select the channel that will be added or deleted.

2.Press the MENU button to display the menu.

	Press the	or	button to select “Channel”, then press the ENTER			button.
3.	Press the	or	button to select “Add/Delete”, then press the ENTER			button.
4.	Press the	or	button to select the channels to be deleted or added.
5.	Press the	button to select “		” column, then press the ENTER	button.

The channels marked with “ ” will be added.

6.Press the EXIT button to exit.

You can directly select any channel (including an erased channel) by using the number buttons on the remote control.

Use the number buttons to directly select the channel that will be added or erased. Press the ADD/DEL button on the remote control.

Fine Tuning Channels

Channel

Air/Cable : Air

Auto Program

Add/Delete

Fine Tune

Move Enter Return

Use fine tuning to manually adjust a particular channel for optimal reception.

1.Use the number buttons to directly select the channel that you want to fine tune.

2.Press the MENU button to display the menu.

	Press the	or	button to select “Channel”, then press the ENTER	button.
3.	Press the	or	button to select “Fine Tune”, then press the ENTER	button.
4.	Press the	or	button to adjust the fine tuning.

5.To store the fine tuning setting in the TV’s memory, press the ENTER button.

6.Press the EXIT button to exit.

If you do not store the fine-tuned channel in memory, adjustments are not saved.

Fine tuned channels that have been saved are marked with an asterisk “ * ” on the right-hand side of the

channel number in the channel banner.
To reset the fine-tuning, select “Reset” by pressing the	or	button and then press the ENTER
button.

English-13