Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.

1. Press the MENU button to display the menu. Press the  or 

	button to select “Picture”, then press the ENTER button.
2.	Press the ENTER button again, to select “Mode”.
3.	Press the ENTER button again, to select “Mode”.
4.	Press the  or  button to select the desired picture effect.
	Press the ENTER button.
5.	Press the EXIT button to exit.

You can also press the P.MODE button on the remote control to select one of the picture settings.

Dynamic: Selects the picture for high-definition in a bright room.

Standard: Selects the picture for optimum display in a normal environment.

Movie: Selects the picture for comfortable display in a dark room.

Custom: Select to view your favorite display settings.

(Refer to “Adjusting the Custom Picture”)

The Picture mode must be adjusted separately for each input source.

You can return to the factory defaults picture settings by selecting the “Reset”. (Refer to “Resetting the Picture Settings to the Factory Defaults” on page 13)

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

1. To select the desired picture effect, follow the

“Changing the Picture Standard” instructions number 1 to 4.

2. Press the  or  button to select a particular item. Press the ENTER button.

3. Press the  or  button to decrease or increase the value of a particular item. Press the ENTER button.

4.Press the EXIT button to exit.

Contrast: Adjusts the lightness and darkness between objects and the background.

Brightness: Adjusts the brightness of the whole screen.

Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.

Colour: Adjusts the colours, making them lighter or darker.

Tint (NTSC only): Adjusts the colour of objects, making them more red or green for a more natural look.

The adjusted values are stored according to the selected Picture mode.

In PC Mode, Only “Contrast”, “Brightness” and “Colour” can be adjusted

Changing the Colour Tone

You can select the most comfortable colour tone to your eyes.

1.	To select the desired picture effect, follow the
	“Changing the Picture Standard” instructions number 1 to 4
2.	Press the  or  button to select “Colour Tone”, then press the ENTER button.
3.	Press the  or  button to select the desired colour tone setting.
	Press the ENTER button.
4.	Press the EXIT button to exit.

Cool2: Makes the colour temperature bluer than “Cool1” menu.

Cool1: Makes whites bluish.

Normal: Keeps whites white.

Warm1: Makes whites reddish.

Warm2: Makes the colour temperature redder than “Warm1” menu.

The adjusted values are stored according to the selected Picture mode.

English-12