Samsung LE23R8, LE26R8 manual Installing Batteries in the Remote Control, Switching On and Off

Page 10

Installing Batteries in the Remote Control

1.Lift the cover at the back of the remote control upward as shown in the

figure.

2. Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.

3.Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1.Is the TV power on?

2.Are the plus and minus ends of the batteries reversed?

3.Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.

1.Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2.Press the button on the front of the set.

You also can press the POWER button or the TV/DTV button on the remote control to turn the TV on.

The programme that you were watching last is reselected automatically.

3.Press the numeric button (0~9) or channel up/down (/) button on the remote control or button on the right side of the set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

4.To switch your set off, press the POWER button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1.Press the POWER button on the remote control.

The screen is turned off and a red standby indicator appears on the front of your set.

2.To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or channel up/down (/) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).

It is best to unplug the set from the mains and aerial.

English -

Image 10

Contents 0818 717 Samsung Country Customer Care Centre Web SiteModel Serial No Precautions When Displaying a Still Image Still image may cause permanent damage to the TV screenContents Symbol List of Parts Installing the StandInstalling the Wall Mount Kit Cover-BottomViewing the Control Panel Connecting Set-Top Box, VCR or DVD Viewing the Connection PanelDigital Audio OUT Optical Viewing the Remote Control Teletext FunctionsPlacing Your Television in Standby Mode Installing Batteries in the Remote ControlSwitching On and Off Mains lead is attached to the rear of your setPlug & Play Storing Channels Automatically If you want to reset this featureMessage Start Plug & Play is displayed Storing Channels Manually Setting the Channel Lists Activating the Child LockThen Sorting the Stored ChannelsAssigning Channels Names Move on the next letter Press the buttonFine Tuning Channel Reception LNA Low Noise AmplifierChanging the Picture Standard Adjusting the Custom PictureTint function is available only in Hdmi and Component mode To select the desired picture effect, followActivating Backlight Changing the Colour ToneENTER/OK button Configuring Detailed Settings on the Picture Changing the Picture Size Press the or button to select Size, then pressResetting the Picture Settings to the Factory Defaults Selecting the Screen ModeFreezing the Current Picture  Active Colour Off/On Digital NR / Active Colour / DNIe / Movie Plus Digital NR Off/Low/Medium/High/Auto  DNIe Off/Demo/OnPIP Settings Viewing the Picture In Picture PIPHdmi Black Level Changing the Sound StandardAdjusting the Sound Settings Setting the TruSurround XT SRS TS XTAdjusting the Volume Automatically Connecting HeadphonesSelecting the Sound Mode ScreenSelecting the Internal Mute Listening to the Sound of the Sub PictureSetting and Displaying the Current Time Resetting the Sound Settings to the Factory DefaultsPress Setting the Sleep Timer Switching the Television On and Off AutomaticallyChoosing Your Language Press the Menu button to display the on-screen menuBlue Screen Setting the Blue Screen Mode / Selecting the MelodySetting the Home Theater PC  Blue Screen Off/OnSetting the Light Effect Using the Energy Saving FeatureSelecting the Source Editing the Input Source NamesPreviewing the DTV Menu System PCMPress the D.MENU button to display the DTV menu Updating the Channel List AutomaticallyUpdating the Channel List Manually Press the or button to select Channel, then pressEditing Your Favourite Channels QVCPreview MoveDelete Selecting Channel List Displaying Programme InformationViewing the EPG Electronic Programme Guide Information Full GuideSetting the Default Guide Using the Scheduled ListYou can preset the default guide style Viewing All Channels and Favourite Channels EPG menu, you can display all channels or favourite channelsPower Off, MUTE, 8, 2, 4, Power On Adjusting the Menu TranslucencySetting up the Parental Lock You can set the translucency of the menuSelecting the Audio Format Setting the SubtitleSetting the Subtitle Mode You can activate and deactivate the subtitlesSelecting the Time Zone Spain only Select the time zone where locateSelecting the Digital Text Viewing Product Information Manual Upgrade Checking the Signal InformationYou can get information about the signal status Upgrading the SoftwareViewing Common Interface Selecting the CI Common Interface MenuResetting Selecting the Preferred Language Audio, Subtitle or TeletextPreference Teletext DecoderSelecting a Specific Teletext To activate the teletext mode and display the contentsDisplaying the Teletext Information Press the TEXT/MIXUsing Fastext to Select a Teletext Setting Up Your Remote ControlRemote Control Codes VCRCable BOX Samsung SET-TOP BOX Display Modes Setting up Your PC Software Based on Windows XPHDMI/DVI Input Setting the PC Troubleshooting Before Contacting Service Personnel Using the Anti-Theft Kensington LockOptional Technical and Environmental Specifications WeightRISK OF ELECTRIC SHOCK DO NOT OPEN United Kingdom This page is intentionally Left blank