Samsung LE26R8, LE23R8 manual Changing the Picture Standard, Adjusting the Custom Picture

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.

1.Press the MENU button to display the menu. Press the ENTER/OK button, to select "Picture".

2.Press the ENTER/OK button again, to select "Mode".

3.Press the ▲ or ▼ button to select the desired picture effect. Press the ENTER/OK button.

4.Press the EXIT button to exit.

Dynamic: Selects the picture for high-definition in a bright room.

Standard: Selects the picture for optimum display in a normal environment.

Movie: Selects the picture for comfortable display in a dark room.

The Picture mode must be adjusted separately for each input source.

You can return to the factory defaults picture settings by selecting the "Reset".

(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 19)

TV	Picture
Mode	: Dynamic	
Contrast		100
Brightness		50
Sharpness		75
Colour	G50	55
Tint		R50
Colour Tone	: Cool1	
Detailed Settings		
Backlight	: 10	
sMore
Move	Enter	Return
TV

	Picture
Mode	:	Dynamic
Contrast		Standard 100
Brightness		Movie	50
Sharpness			75
Colour	G50		55
Tint			R50
Colour Tone	: Cool1
Detailed Settings
Backlight	: 10
sMore
Move	Enter		Return

You can also press the P.MODE button on the remote control to select one of the picture settings.

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

1.To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

2.Press the ▲ or ▼ button to select a particular item. Press the ENTER/OK button.

3.Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER/OK button.

4.Press the EXIT button to exit.

TV	Picture
Mode	: Dynamic	
Contrast		100
Brightness		50
Sharpness		75
Colour	G50	55
Tint		R50
Colour Tone	: Cool1	
Detailed Settings		
Backlight	: 10	
sMore
Move	Enter	Return

Contrast: Adjusts the lightness and darkness between objects and the background.

Brightness: Adjusts the brightness of the whole screen.

Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.

Colour: Adjusts the colours, making them lighter or darker.

Tint (NTSC or DTV only): Adjusts the colour of objects, making them more red or green for a more natural look.

The adjusted values are stored according to the selected Picture mode. In PC Mode, Only "Contrast" and "Brightness" can be adjusted.

“Tint” function is available only in “HDMI” and “Component” mode.

English - 15