Samsung LE23R8, LE26R8 manual Digital Audio OUT Optical

Page 8

4Connecting an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

-An outdoor aerial / A cable television network / A satellite network

5Connecting CI (Common Interface) CARD

-When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.

-The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

-When the channel information configuration has finished, the message "Updating Completed" is displayed, indicating that the channel list is now updated.

You must obtain a CI CARD from a local cable service provider.

Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it.

Insert the CI-Card in the direction marked on it.

7Connecting External A/V Devices

-Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

-Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corre sponding audio out connectors on the A/V device.

-Headphone may be connected to the headphone output (6) on the rear of your set. While the head phone is connected, the sound from the built-in speakers will be disabled.

8Connecting Computer

-Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to the Video Card of your computer.

-Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other end to "Audio Out" of the sound card on your computer.

9DIGITAL AUDIO OUT (OPTICAL)

-Connect to a Digital Audio Component.

0SERVICE

- Service connection for qualified service engineer.

!Connecting Component Devices (DTV/DVD)

-Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.

-If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your set.

-The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.

-Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.

-This LCD TV displays its optimum picture resolution in 720p mode.

-This LCD TV displays its maximum picture resolution in 1080i mode.

@Kensington Lock

-The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

-If you want to use a locking device, contact the dealer where you purchased the TV.

-The place of the Kensington Lock may be different depending on its model.

English - 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model Serial No Country Customer Care Centre Web Site0818 717 Samsung Precautions When Displaying a Still Image Still image may cause permanent damage to the TV screenContents Symbol Installing the Stand Installing the Wall Mount Kit List of Parts Cover-BottomViewing the Control Panel Connecting Set-Top Box, VCR or DVD Viewing the Connection PanelDigital Audio OUT Optical Viewing the Remote Control Teletext FunctionsInstalling Batteries in the Remote Control Switching On and OffPlacing Your Television in Standby Mode Mains lead is attached to the rear of your setPlug & Play Message Start Plug & Play is displayed If you want to reset this featureStoring Channels Automatically Storing Channels Manually Setting the Channel Lists Activating the Child LockSorting the Stored Channels Assigning Channels NamesThen Move on the next letter Press the buttonFine Tuning Channel Reception LNA Low Noise AmplifierAdjusting the Custom Picture Tint function is available only in Hdmi and Component modeChanging the Picture Standard To select the desired picture effect, followENTER/OK button Changing the Colour ToneActivating Backlight Configuring Detailed Settings on the Picture Changing the Picture Size Press the or button to select Size, then pressFreezing the Current Picture Selecting the Screen ModeResetting the Picture Settings to the Factory Defaults Digital NR / Active Colour / DNIe / Movie Plus  Digital NR Off/Low/Medium/High/Auto Active Colour Off/On  DNIe Off/Demo/OnPIP Settings Viewing the Picture In Picture PIPHdmi Black Level Changing the Sound StandardAdjusting the Sound Settings Setting the TruSurround XT SRS TS XTConnecting Headphones Selecting the Sound ModeAdjusting the Volume Automatically ScreenSelecting the Internal Mute Listening to the Sound of the Sub PicturePress Resetting the Sound Settings to the Factory DefaultsSetting and Displaying the Current Time Setting the Sleep Timer Switching the Television On and Off AutomaticallyChoosing Your Language Press the Menu button to display the on-screen menuSetting the Blue Screen Mode / Selecting the Melody Setting the Home Theater PCBlue Screen  Blue Screen Off/OnSetting the Light Effect Using the Energy Saving FeatureSelecting the Source Editing the Input Source NamesPreviewing the DTV Menu System PCMUpdating the Channel List Automatically Updating the Channel List ManuallyPress the D.MENU button to display the DTV menu Press the or button to select Channel, then pressEditing Your Favourite Channels QVCDelete MovePreview Selecting Channel List Displaying Programme InformationViewing the EPG Electronic Programme Guide Information Full GuideYou can preset the default guide style Using the Scheduled ListSetting the Default Guide Viewing All Channels and Favourite Channels EPG menu, you can display all channels or favourite channelsAdjusting the Menu Translucency Setting up the Parental LockPower Off, MUTE, 8, 2, 4, Power On You can set the translucency of the menuSetting the Subtitle Setting the Subtitle ModeSelecting the Audio Format You can activate and deactivate the subtitlesSelect the time zone where locate Selecting the Digital TextSelecting the Time Zone Spain only Viewing Product InformationChecking the Signal Information You can get information about the signal status Manual Upgrade Upgrading the SoftwareViewing Common Interface Selecting the CI Common Interface MenuResetting Selecting the Preferred Language Audio, Subtitle or TeletextPreference Teletext DecoderTo activate the teletext mode and display the contents Displaying the Teletext InformationSelecting a Specific Teletext Press the TEXT/MIXUsing Fastext to Select a Teletext Setting Up Your Remote ControlRemote Control Codes VCRCable BOX Samsung SET-TOP BOX HDMI/DVI Input Setting up Your PC Software Based on Windows XPDisplay Modes Setting the PC Optional Using the Anti-Theft Kensington LockTroubleshooting Before Contacting Service Personnel Technical and Environmental Specifications WeightRISK OF ELECTRIC SHOCK DO NOT OPEN United Kingdom This page is intentionally Left blank
Top Page Image Contents