Samsung LN19A450 user manual Installing Batteries in the Remote Control

Page 8

Installing Batteries in the Remote Control

1.Lift the cover at the back of the remote control upward as shown in the figure.

2.Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.

3.Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.

The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries should last for about one year.)

If the remote control doesn’t work, check the following:

1.Is the TV power on?

2.Are the plus and minus ends of the batteries reversed?

3.Are the batteries drained?

4.Is there a power outage or is the power cord unplugged?

5.Is there a special fluorescent light or neon sign nearby?

Connections

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like the diagram to the right, see "Antennas with 300 Twin Leads" below.

If your antenna has one lead that looks like the diagram to the right, see "Antennas with 75

If you have two antennas, see "Separate VHF and UHF Antennas".

Antennas with 300 win Leads

If you are using an off-air antenna (such as a roof antenna or "rabbit ears") that has 300 below.

1.Place the wires from the twin leads under the screws on a 300-75 (not supplied).

Use a screwdriver to tighten the screws.

ons

2.Plug the adaptor into the ANT IN terminal on the back of the TV.

Antennas with 75

1.Plug the antenna lead into the ANT IN terminal on the back of the TV.

Separate VHF and UHF Antennas

ANT IN

ANT IN

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).

1. Connect both antenna leads to the combiner.

UHF

VHF

2.Plug the combiner into the ANT IN terminal on the bottom of the rear panel.

ANT IN

UHF

VHF

English - 6

Image 8

Contents LCD TV See the warranty card for more information on warranty terms Contents General Information List of Features Accessories Viewing the Control Panel Buttons on the Lower-Right Part of the Panel Side Panel buttons + VOLViewing the Connection Panel PC in PC / AudioRemote Control Installing Batteries in the Remote Control Connections Connecting VHF and UHF AntennasConnecting Cable TV Connecting to a Cable Box that Descrambles All ChannelsConnecting to a Cable Box that Descrambles Some Channels Cable without a Cable BoxWhat is HDMI? Connecting a Camcorder Y, P B, P R jacks on the TVComponent Y, P B Or S-Video Cable betweenConnecting a VCR Video ConnectionConnecting a Digital Audio System Connecting an AmpliConnecting a PC Using the D-Sub CableUsing the HDMI/DVI Cable Each PC has a different back panel configurationPlug & Play Feature Auto Air and Cable antenna signalsOperation Turning the TV On and Off Displayed PressUsing the Channel Buttons Using the Number ButtonsChanging Channels Press the Enter buttonViewing the Menus Adjusting the VolumeViewing the Display Using the Tools Button Selecting the Video Signal-sourceEasy Setting Memorizing the ChannelsStoring Channels in Memory Automatic Method Press the Menu button to display the menuTo Select the Source To Edit the Input Source NameInput Edit NamePress the Enter button to select Mode. Press Customizing the Picture SettingsPicture Control Changing the Picture Standard Setting the Color Tone Setting the Screen SizeCon Activating Picture OptionsAfter selecting Zoom1, Zoom2 or Wide Fit Input Source Picture SizeWide Fit To fit the entire screenSetting the Digital Noise Reduction Setting the Hdmi Black LevelSetting the Film Mode EnterTVPicture Resetting the Picture Settings to the Factory DefaultsButton Press the Exit button to exit Each mode can be reset Sound Sound Control Changing the Sound StandardCustomizing the Sound Setting the TruSurround XT Multi-Track Options is available only in TV modeChoosing a Multi-Channel Sound MTS track Digital Preferred LanguageMulti-Track Sound Automatic Volume ControlChoosing a Multi-Channel Sound MTS track Analog Setting the TV Speakers On/Off Connecting Headphones Sold separatelyChannel Control Clearing Scrambled Channels Digital To stop searching scrambled channelsPress the Enter Button to select Stop Press the es, then pressAdding and Erasing Channels Press the Enter button to select AllTo delete the channel Mark will disappear Channel ListPress the Tools button on the remote control To Set-Up Your Favorite ChannelsCurrent channel is added to or deleted from Favorites Channel List / AddedViewing the Channel Lists Labeling Channels Press Then press the Enter buttonPress Select a second letter or digit by pressing NameFine Tuning Analog Channels Checking the Digital-Signal StrengthPC Display Using Your TV as a Computer PC Display Setting Up Your PC Software Based on Windows XPDisplay Modes Sub InputSetting up the TV with your PC How to Auto AdjustAdjusting the Screen Quality ButtonViewing the Resolution You can confirm the resolution configured for the PCChanging the Screen Position Initializing the Screen Position, Coarse and FineTime Setting Setting the Clock Option 1 Setting the Clock ManuallyTime ClockTVClock Option 2 Setting the Clock AutomaticallyTime Zone Setting the Sleep Timer Press the Timer, then press Enter buttonSetting the Timer sets the Activation to On automatically To cancel the set sleep timerSetting the On/Off Timer Auto Power OffTimer Function Description Selecting a Menu LanguageUsing the V-Chip Setting Up Your Personal ID Number PINA Only ChipHow to Enable/Disable the V-Chip How to Set up Restrictions Using the TV Parental GuidelinesHow to set the FV, D, L, S and V sub-ratings V-Chip screen will appear. PressButton TV Parental Guidelines screen will appear Press ProcessMpaa Rating, then press the Enter button Button toSelect a particular Mpaa category. Pressing Mpaa RatingHow to Set up Restrictions Using the ‘Canadian English’ Canadian EnglishHow to Set up Restrictions Using the ‘Canadian French’ Canadian FrenchRating Using the V-Chip for Digital channelsDownloadable U.S. Rating, then press the Enter button Default is CC1 Viewing Closed Captions On-Screen Text Messages AnalogPress the Enter button to select Caption CaptionCaption Options Viewing Closed Captions On-Screen Text Messages DigitalButton Press Adjusting the TV On/Off Melody Sound Using the Energy Saving FeatureMelody does not play Press the orUpgrading the Software Appendix Troubleshooting Problem Possible SolutionAdjust the Coarse tuning and then adjust the Fine tuning InputHow to Adjust the Stand LN19A450C1D, LN19A451C1D How to Adjust the Angle of the TV LN19A450C1D, LN19A451C1DInstalling the Wall Mount Kit LN19A450C1D, LN19A451C1D Using the Decoration Covers LN19A450C1D, LN19A451C1DInstalling the Stand Disconnecting the StandWall Mount Kit Specifications Vesa Using the Anti-Theft Kensington Lock Dimensions WxDxH SpeciThis page is intentionally Left blank Contact Samsung Worldwide Contacte con Samsung WorldwideSAMSUNG726-7864 Challenger Road Ridgefield Park, NJ BN68-01395B-00LN19A450C1D/LN19A451C1D LN22A450C1D/LN22A451C1D Video Good Video NormalRemote Control Picture size selectionConnect Audio Cables between Connect an Hdmi Cable betweenConnect a DVI to Hdmi Cable or Connecting a Camcorder Connect a Video Cable or S-VideoConnecting a VCR To begin, follow steps 1-3Connecting a Digital Audio System TheaterConnecting a PC DTV Cable Cable 24 11 % Cable Start AutoAuto Program in Progress Setting the Channel List To Select the Source Source ListCheck signal cable message Not Supported Mode message Poor pictureCountry Customer Care Center Web Site Address BN68-01396B-00Page TP 5--- 8- ~ ~. jJ Page \, \ Comcrning 0pl.rationand mainlcllal11.has hl.cl1 ~ Avertissement POUl Eviter Tout Risque Regulatory Compliance Statements Important Safety InstructionsUL Only AA68-03242L-01 Page Page Samsung Color Television & Projection Television AA68-00371C-06