¦Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1.Press the POWER Pbutton on the remote control. N You can also use the POWER Pbutton on the TV.
N The message Select Language of the OSD. is displayed.
2.Press the ▲ or ▼ button to select the language, then press the ENTEREbutton. The message Select ‘Home Use’ when installing this TV in your home. is displayed.
Plug & Play
Select Language of the OSD.
Language : English►
E Enter
3.Press the ◄ or ► button to select Store Demo or Home Use, then press the ENTEREbutton. The message Select the Antenna source to memorize. is displayed.
N We recommend setting the TV to Home Use mode for the best picture in your home environment.
N Store Demo mode is only intended for use in retail environments. If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4.Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTEREbutton to select Start. N Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna signals.
N In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ► button, then press the ENTEREbutton. If you have Digital cable, select the cable system signal source for both Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
5.Press the ENTEREbutton to select Start. The TV will begin memorizing all of the available channels. N To stop the search before it has finished, press the ENTEREbutton with Stop selected.
N After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears. Press the ENTEREbutton when channel memorization is complete. The message Set the Clock Mode. is displayed.
6.Press the ▲ or ▼ button to select Auto, then Press the ENTEREbutton. The message Set to daylight saving time. is displayed. If you select Manual, Set current date and time is displayed.
7.Press the ▲ or ▼ button to select Off, On or Auto, then press the ENTEREbutton.
8.Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTEREbutton. If you have received a digital signal, the time will be set automatically. If not, see page 22 to set the clock.
9.The connection method to provide the best quality HD is offered. After confirming the method, press the ENTEREbutton.
10.The message Enjoy your TV. is displayed. When you have finished, press the ENTEREbutton.
If you want to reset this feature...
1.Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTEREbutton.
2.Press the ENTEREbutton again to select Plug & Play.
N The Plug & Play feature is only available in the TV mode.