Samsung 400UXn Introduction There are two hingesleft and right. Use the correct one, Wall Bracket

Page 14
Introduction

Introduction

There are two hinges(left and right). Use the correct one.

A -

Captive Screw

B -

Wall Bracket

C -

Hinge (Left)

D -

Hinge (Right)

2.Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct.

If the length is too short or long, loosen all or some of the 4screws on the wall bracket to adjust the length.

A -

Length between the two locking holes

3.Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bit to drill holes deeper than 35 mm. Fix each anchor in the corresponding hole. Match each of the brackets and hinge holes to the corresponding anchor holes and insert and tighten the 11 screws A.

Image 14
Contents SyncMaster 400UXn,460UXn LCD MonitorUnpacking 400UXn Package ContentsIntroduction ManualsSold separately 400UXn Your LCD Display FrontOthers AV / S-Video / Component Mode AV / S-Video PC / BNC / DVI Mode → MagicInfoAV / S-Video / Component / HDMI Mode BNC AV / S-Video / HDMI Mode DVI Component PC / DVI Mode HDMI PC / BNC ModePOWER S/W ON / OFF O RearRemote Control Sensor POWER INREMOTE OUT/IN AV AUDIO IN L-AUDIO-R LCD Display Audio Connection Terminal Input 400UXn Remote Control PIP SOURCE SWAP SIZEtrol and the LCD Display except for the Power and LOCK buttons AV / S-Video / Component P.MODEPC / DVI / BNC M/B MagicBright When you press this button, current picture mode is displayed onDUAL tonsSIZE 400UXn Mechanical Layout Mechanical Layout NETWORK MODEL SIZE26. PIP 27. SOURCE 28. SWAP LCD Display Head NETWORK MODEL SIZE Installation VESA Bracket Wall Bracket Assembly DimensionsWall Bracket Installation ComponentsWall Bracket Introduction There are two hingesleft and right. Use the correct oneCaptive Screw Hinge LeftTo mount the product on the wall bracket Wall Bracket Angle Adjustment 460DXn Package Contents Sold separately 460DXn Your LCD Display Front AV / S-Video / Component Mode AV / S-Video PC / BNC / DVI Mode RearAV / S-Video / Component / HDMI Mode BNC AV / S-Video / HDMI Mode DVI Component PC / DVI Mode HDMI PC / BNC ModeIntroduction Introduction 460DXn Remote Control Introduction → Custom Introduction 460DXn -- Mechanical Layout Mechanical Layout NETWORK MODEL SIZE LCD Display Head NETWORK MODEL SIZEInstallation VESA Bracket Wall Bracket Assembly To mount the product on the wall bracket Introduction 2. Insert the screw B into the plastic hanger Wall Bracket Angle Adjustment Connections Connecting a ComputerUsing a Power cord with Earth Connecting to Other devices Connecting a VCR Connecting a DVD PlayerConnecting a Camcorder Connecting a DTV Set Top Box Connecting to an Audio SystemConnecting Using a DVI to HDMI Cable Connecting to a Wired Remote ControlConnecting Using a HDMI Cable Connecting a LAN Cable Connecting a USB deviceYou can connect USB devices such as a mouse or keyboard Using the Software Installation MagicInfo Pro Installation7. Click Install Using the Software6. Choose a folder to install the MagicInfo Pro program 8. The Installation Status window appears System Requirements Maintenance and Cleaning TroubleshootingSelf-Test Feature Check Warning MessagesCheck List Symptoms and Recommended ActionsProblems related to the Installation PC Mode Q Not Optimum Mode message Problems related to the ScreenQ Check Signal Cable message Problems related to Audio Problems related to the Remote ControlProblems related to MagicInfo Q & AQ How can I play the video? Set the resolution at the Control Panel → Display → Screen SaverQ How can I clean the outer case/LCD Panel?