Samsung 400UXn user manual Connections, Connecting a Computer, Using a Power cord with Earth

Page 33

Connections

Connections

Connecting a Computer

Using a Power cord with Earth

•In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When un- wiring the earth lead, make sure to disconnect the AC power in advance.

Note

AV input devices such as DVD players, VCR's or camcorders as well as your computer can be con- nected to the LCD Display. For detailed information on connecting AV input devices, refer to the User Controls under Adjusting Your LCD Display.

Connect the power cord for your LCD Display to the power port on the back of the LCD Display. Trun on the power switch.

There are 3 ways to connect the D-sub to your LCD Display. Choose one of the following:

Using the D-sub (Analog) connector on the video card.

•Connect the D-sub to the 15-pin, RGB port on the back of your LCD Display and the 15 pin D-sub Port on the computer.

Using the DVI (Digital) connector on the video card.

•Connect the DVI Cable to the DVI(HDCP) port on the back of your LCD Display and the DVI port on the computer.

Image 33

Contents LCD Monitor SyncMaster 400UXn,460UXnIntroduction 400UXn Package ContentsUnpacking Manuals400UXn Your LCD Display Front OthersSold separately AV / S-Video / Component / HDMI Mode BNC AV / S-Video / HDMI Mode DVI → MagicInfoAV / S-Video / Component Mode AV / S-Video PC / BNC / DVI Mode Component PC / DVI Mode HDMI PC / BNC ModeRemote Control Sensor RearPOWER S/W ON / OFF O POWER INREMOTE OUT/IN AV AUDIO IN L-AUDIO-R LCD Display Audio Connection Terminal Input PIP SOURCE SWAP SIZE 400UXn Remote ControlPC / DVI / BNC M/B MagicBright AV / S-Video / Component P.MODEtrol and the LCD Display except for the Power and LOCK buttons When you press this button, current picture mode is displayed ontons DUAL400UXn Mechanical Layout Mechanical Layout NETWORK MODEL SIZE 26. PIP 27. SOURCE 28. SWAPSIZE LCD Display Head NETWORK MODEL SIZE Installation VESA Bracket Wall Bracket Installation DimensionsWall Bracket Assembly ComponentsCaptive Screw Introduction There are two hingesleft and right. Use the correct oneWall Bracket Hinge LeftTo mount the product on the wall bracket Wall Bracket Angle Adjustment 460DXn Package Contents Cables 460DXn Your LCD Display Front AV / S-Video / Component / HDMI Mode BNC AV / S-Video / HDMI Mode DVI RearAV / S-Video / Component Mode AV / S-Video PC / BNC / DVI Mode Component PC / DVI Mode HDMI PC / BNC ModeIntroduction Component Connection connecting the PR, Y, PB ports 460DXn Remote Control Introduction → Custom Introduction LCD Display Head NETWORK MODEL SIZE 460DXn -- Mechanical Layout Mechanical Layout NETWORK MODEL SIZEInstallation VESA Bracket Wall Bracket Assembly To mount the product on the wall bracket Introduction 2. Insert the screw B into the plastic hanger Wall Bracket Angle Adjustment Connecting a Computer Using a Power cord with EarthConnections Connecting to Other devices Connecting a DVD Player Connecting a VCRConnecting a Camcorder Connecting to an Audio System Connecting a DTV Set Top BoxConnecting to a Wired Remote Control Connecting Using a HDMI CableConnecting Using a DVI to HDMI Cable Connecting a USB device Connecting a LAN CableYou can connect USB devices such as a mouse or keyboard Installation MagicInfo Pro Installation Using the SoftwareUsing the Software 6. Choose a folder to install the MagicInfo Pro program7. Click Install 8. The Installation Status window appears System Requirements Self-Test Feature Check TroubleshootingMaintenance and Cleaning Warning MessagesSymptoms and Recommended Actions Problems related to the Installation PC ModeCheck List Problems related to the Screen Q Check Signal Cable messageQ Not Optimum Mode message Problems related to the Remote Control Problems related to AudioQ & A Problems related to MagicInfoSet the resolution at the Control Panel → Display → Screen Saver Q How can I clean the outer case/LCD Panel?Q How can I play the video?