Samsung 400UXn user manual Connecting to Other devices, Using a Power cord with Earth

Page 34

Connecting to Other devices

Connections

Using the BNC (Analog) connector on the video card.

•Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, V ports on the back of your LCD Display and the 15 pin D-sub Port on the computer.

Connect the audio cable for your LCD Display to the audio port on the back of your computer.

Note

•Turn on both your computer and the LCD Display.

•The DVI cable or BNC cable is optional.

•Contact a local SAMSUNG Electronics Service Center to buy optional items.

Connecting to Other devices

Using a Power cord with Earth

•In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When un- wiring the earth lead, make sure to disconnect the AC power in advance.

Note

AV input devices such as DVD players, VCR's or camcorders as well as your computer can be con- nected to the LCD Display. For detailed information on connecting AV input devices, refer to the User Controls under Adjusting Your LCD Display.

Image 34

Contents SyncMaster 400UXn,460UXn LCD MonitorUnpacking 400UXn Package ContentsIntroduction ManualsOthers 400UXn Your LCD Display FrontSold separately AV / S-Video / Component Mode AV / S-Video PC / BNC / DVI Mode → MagicInfoAV / S-Video / Component / HDMI Mode BNC AV / S-Video / HDMI Mode DVI Component PC / DVI Mode HDMI PC / BNC ModePOWER S/W ON / OFF O RearRemote Control Sensor POWER INREMOTE OUT/IN AV AUDIO IN L-AUDIO-R LCD Display Audio Connection Terminal Input 400UXn Remote Control PIP SOURCE SWAP SIZEtrol and the LCD Display except for the Power and LOCK buttons AV / S-Video / Component P.MODEPC / DVI / BNC M/B MagicBright When you press this button, current picture mode is displayed onDUAL tons26. PIP 27. SOURCE 28. SWAP 400UXn Mechanical Layout Mechanical Layout NETWORK MODEL SIZESIZE LCD Display Head NETWORK MODEL SIZE Installation VESA Bracket Wall Bracket Assembly DimensionsWall Bracket Installation ComponentsWall Bracket Introduction There are two hingesleft and right. Use the correct oneCaptive Screw Hinge LeftTo mount the product on the wall bracket Wall Bracket Angle Adjustment 460DXn Package Contents Others 460DXn Your LCD Display Front AV / S-Video / Component Mode AV / S-Video PC / BNC / DVI Mode RearAV / S-Video / Component / HDMI Mode BNC AV / S-Video / HDMI Mode DVI Component PC / DVI Mode HDMI PC / BNC ModeIntroduction Introduction 460DXn Remote Control Introduction → Custom Introduction 460DXn -- Mechanical Layout Mechanical Layout NETWORK MODEL SIZE LCD Display Head NETWORK MODEL SIZEInstallation VESA Bracket Wall Bracket Assembly To mount the product on the wall bracket Introduction 2. Insert the screw B into the plastic hanger Wall Bracket Angle Adjustment Using a Power cord with Earth Connecting a ComputerConnections Connecting to Other devices Connecting a VCR Connecting a DVD PlayerConnecting a Camcorder Connecting a DTV Set Top Box Connecting to an Audio SystemConnecting Using a HDMI Cable Connecting to a Wired Remote ControlConnecting Using a DVI to HDMI Cable Connecting a LAN Cable Connecting a USB deviceYou can connect USB devices such as a mouse or keyboard Using the Software Installation MagicInfo Pro Installation6. Choose a folder to install the MagicInfo Pro program Using the Software7. Click Install 8. The Installation Status window appears System Requirements Maintenance and Cleaning TroubleshootingSelf-Test Feature Check Warning MessagesProblems related to the Installation PC Mode Symptoms and Recommended ActionsCheck List Q Check Signal Cable message Problems related to the ScreenQ Not Optimum Mode message Problems related to Audio Problems related to the Remote ControlProblems related to MagicInfo Q & AQ How can I clean the outer case/LCD Panel? Set the resolution at the Control Panel → Display → Screen SaverQ How can I play the video?