Picture Reset Reset Picture Mode / Cancel, Equalizer

■■ HDMI Black Level (Normal / Low): Lets you select the black level on the screen to adjust the screen depth.

✎✎ Available only in HDMI mode.

■■ Film Mode (Off / Auto): Sets the TV so that it senses automatically and then process film signals from all sources and adjusts the picture for optimum quality.

✎✎ Available in TV, AV, COMPONENT (480i / 1080i) and HDMI (480i / 1080i).

■■ Screen Burn Protection: To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. The Time setting allows you to program the time between movement of the picture in minutes.

Pixel Shift (Off / On): Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after images on the screen.

✎✎ Optimum condition for pixel shift

	Item	TV/AV/Component/
	Item	HDMI/PC
		HDMI/PC
Horizontal	0~4	4

Vertical	0~4	4

Time (minute)	1~4 min	4 min

✎✎ The Pixel Shift value may differ depending on the TV size (inches) and mode.

✎✎ This function is not available in the Screen Fit mode.

Scrolling: This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time.

✎✎ The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-images on the screen. If the after-image is not removed after performing the function, repeat the function again.

✎✎ Press any key on the remote control to cancel this feature.

Side Gray (Dark / Light): When you watch TV with the screen ratio set to 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides.

Picture Reset (Reset Picture Mode / Cancel)

Resets your current picture mode to its default settings.

Sound Menu

¦¦ Changing the Preset Sound Mode

OO MENUm→ Sound → Mode → ENTERE

Select an option using the up and down arrow keys, and the press ENTER.

Mode

Use the up and down arrow keys to select an option, and then press ENTER.

■■ Standard: Selects the normal sound mode.

■■ Music: Emphasizes music over voices.

■■ Movie: Provides the best sound for movies.

■■ Clear Voice: Emphasizes voices over other sounds.

■■ Custom: Increase the intensity of high-frequency sound

to allow a better listening experience for the hearing impaired.

¦¦ Adjusting Sound Settings

OO MENUm→ Sound → Equalizer → ENTERE

The Equalizer displays a series of sliders. Use the up and down arrow keys to select a slider. Use the left and right arrow keys to change the slider’s value. To Reset the Equalizer, select Reset and press ENTER, then press ENTER again. To exit, select CLOSE, and then press

ENTER.

Equalizer

Adjusts the sound output.

■■ Balance L/R: Adjusts the balance between the right and left speaker.

■■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the volume level of specific bandwidth frequencies.

■■ Reset: Resets the equalizer to its default settings.

¦¦ Sound Settings

OO MENUm→ Sound → ENTERE

SRS TruSurround HD (Off / On)

03 Basic Features

This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF (Head Related Transfer Function) technology.

Samsung 440 Picture Reset Reset Picture Mode / Cancel, Equalizer, SRS TruSurround HD Off / On