Labeling Channels =Analog

Channels can be labeled so that their call letters appear whenever the channel is selected.

1Press the MENU button to display the menu

Press the J, or T button to select Channel, then press the ENTER button.

2Press the _, or V'button to select Name, then press the ENTER button

3Press the A or V'button to select the channel to be assigned a new name, then press the ENTER button.

4Press the A or T button to select a letter, a number or a blank(Results in this sequence: A~Z, 0~9, +, -, *,/, blank).

Press the _ button to switch to the next field, which will be selected. Select a second letter or digit by pressing the _. or V'button, as above.

Repeat the process to select the last three digits. When you have finished, press the ENTER button to assign the new name. Toerase the assigned new name_select Clear by pressing the 4 or I,- button_then press the ENTER button.

Press the EXIT button to exit.

•The names of digital broadcasting channels are automatically assigned and thus cannot be assigned by users.

•If you add or delete the TV channel_the corresponding labet information will also be added or deleted.

Fine Tuning Analog Channels

Use fine tuning to manually adjust a particular channel for optimal reception.

1Press the MENU button to display the menu.

Press the _, or T button to select Channel, then press the ENTER button.

2Press the A or T button to select Fine Tune_ then press the ENTER button.

3Press the 4 or I_ button to adjust the fine tuning.

4Tostore the fine tuning setting in the TV'smemory, press the ENTER button.

Toreset the fine tuning setting, press the _'button to select Reset, then press the ENTER button. Press the EXIT button to exit.

•Only analog TV channels can be fine tuned.

•.... will appear next to the number of fine-tuned channels.

Checking the Digital-Signal Strength

Unlike analog channels, which can vary in reception digital(HDTV) channels have either perfect reception

quality from "snowy" to clear, quality or you will not receive

them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels.

fPress the MENU button to display the menu.

Press the _. or T button to select Channel, then press the ENTER button.

2Press the A or • button to select Signal Strength, then press the ENTER button.

if the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.

Continue to adjust the antenna until you find the best position with the strongest signal. Press the EXIT button to exit.

You can also press the ENTER button to select OK, then press the EXIT button to exit.

You can also press the S.STRENGTN button on the remote control to check the signal strength.

Selecting a Menu Language

1Press the MENU button to display the menu.

Press the A or _'button to select Setup, then press the ENTER button.

2Press the A or T button to select Language, then press the ENTER button.

3Press the A or V'button to select the appropriate language: English_ Espahol or Fran£:ais_ then press the ENTER button.

Press the EXIT button to exit.