![](/images/new-backgrounds/1128087/12808719x1.webp)
❑Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a
1.Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.
N This terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”.
2.Connect this cable to a
ANT IN
Incoming
cableSplitter
3.Connect an Antenna cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.
Incoming
cable
IN | CABLE OUT |
Splitter
Cable Box
4.Connect an Antenna cable between the ANT OUT terminal on the cable box and the
5.Connect another cable between the other OUT terminal on the splitter and the
|
|
| A |
Incoming | IN | CABLE OUT | B |
| |||
cable | Splitter |
| RF (A/B) |
|
| ||
| Cable Box | Switch | |
|
|
| A |
Incoming | IN | CABLE OUT | B |
| |||
cable | Splitter |
|
|
|
| RF (A/B) | |
|
|
| |
|
| Cable Box | Switch |
6.Connect the last Antenna cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV.
|
|
|
| TV Rear |
|
|
|
| A |
Incoming | IN | CABLE | OUT | B |
| ||||
|
|
| ANT IN | |
cable | Splitter |
|
| |
|
| RF (A/B) | ||
|
|
| ||
|
|
|
| |
|
|
|
| Switch |
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
English - 10