Channel Control
Storing Channels
❑Antenna → Air / Cable
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
TPress the TOOLS button to display Tools menu.
You can also switch the antenna by selecting Tools → Switch to Cable (or Air)
❑Auto Program
Channel
Antenna | : Air | ► |
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
•Air: Air antenna signal.
•Cable: Cable antenna signal.
•Auto: Air and Cable antenna signals
NSTD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected.
NAfter all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears.
NIf you want to stop Auto Programming, press the ENTERE button.
The Stop Auto Program? message will be displayed. Select Yes by pressing the
◄ or ► button, then press the ENTERE button.
❑Clearing Scrambled Channel (Digital)
The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed.
This process may take up to 20~30 minutes.
NTo stop searching scrambled channels: Press the ENTERE button to select Stop.
Press the ◄ button to select Yes, then press the ENTERE button.
NThis function is only available in Cable mode.
Clear Scrambled Channel
Removing scrambled channel. DTV Cable 122 3%
Stop
Enter 
Return
❑Fine Tune (Analog)
Use fine tuning to manually adjust a particular channel for optimal reception.
NIf you do not store the
N To reset the fine tuning setting, press the ▼ button to select Reset, then press the ENTERE button.
Fine Tune
Air 8* | Fine Tuned | |
|
| +5 |
Reset |
|
|
UMove LAdjust | Save | Return |
Managing Channels
❑Channel List
Using this menu, you can Add / Delete or set Favorite channels and use the program guide for digital broadcasts.
OPress the CH LIST button on the remote control to bring up the channel lists.
• All Channels: Shows all currently available channels.
• Added Channels: Shows all added channels.
• Favorite: Shows all favorite channels.
• Programmed: Shows all current reserved programs.
Using the Color buttons with the Channel List
•Green (Zoom): Enlarges or shrinks a channel number.
•Yellow (Select): Selects multiple channel lists.
•TTOOLS (Tools): Displays the Add (or Delete), Add to Favorite (or Delete from Favorite), Timer Viewing, Channel Name Edit, Select All, Deselect All, and Auto Program menus (The Options menus may differ depending on the situation.)
NChannel Status Display Icons
♥ | A channel set as a Favorite. |
| c | A channel selected by pressing the yellow button. |
) | A reserved program |
| ( | A program currently being broadcast. |
|
|
|
|
|
English - 20
Continued...