Samsung PPM50M7F, PPM63M7F manual Setting the Screen Burn Protection Timer

➢To remove after images on the screen, use either All White, Inverse or Signal Pattern function. Although both of the three functions remove after images on the screen, Signal Pattern is more effective.

➢The after image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after images on the screen. If after image is not improved after the execution of the function, repeat the function again.

➢Press any button on the remote control to cancel this feature.

Setting the Screen Burn Protection Timer

You can set the timer for Screen Burn Protection (hours, minutes). If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish.

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Setup, then press the ENTER button.

3Press the ENTER button again to select Screen Burn Protection.

Setup
Screen Burn Protection		
Language	: English	
Time	: Off	
Game Mode		
Blue Screen	: Off	
Melody	: Off	
PC	: Off	
Home Theatre PC		

 More

Move Enter Return

4Press the ▲ or ▼ button to select Timer, then press the ENTER button.

5Press the ENTER button again.

6Press the ▲ or ▼ button to select On, then press the ENTER button.

7Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.

Available options: Timer, Mode, Period, Time

Screen Burn Protection

Pixel Shift		
All White		
Signal Pattern		
Inverse		
Timer		
Side Gray	: Dark	
Move	Enter	Return

Mode: All White, Signal Pattern, Inverse

Period: Hour(1~24)

Time: Min.(1~30)

8Press the EXIT button to exit.

	Timer
Timer	: On	
Mode	: All White	
Period	: 1 Hour	
Time	: 30 min.	

Move Enter Return

English - 30