Samsung PPM63M7F, PPM50M7F manual Setting the PC

Setting the PC

➢ Preset to the PC mode by pressing the SOURCE button.
			Setup
1	Press the MENU button to display the menu.	Screen Burn Protection				
2	Press the ▲ or ▼ button to select Setup, then press the	Language		: English		
		Time		: Off		
	ENTER button.	Game Mode				
		Blue Screen		: Off		
3	Press the ▲ or ▼ button to select PC, then press the	Melody		: Off		
		PC				
	ENTER button.	Home Theatre PC		: Off		
4	Select the required option by pressing the ▲ or ▼ button,	 More
	then press the ENTER button.	Move		Enter	Return
	Available options: Image Lock, Position, Auto Adjustment,
	Image Reset, Zoom		PC
5	When you are satisfied with your setting, press the ENTER
		Image Lock				
	button.	Position				
		Auto Adjustment				
6	Press the EXIT button to exit.
		Image Reset				
 Image Lock: Coarse/Fine		Zoom				
	The purpose of picture quality adjustment is to remove or
	reduce picture noise.
	If the noise is not removed by Fine-tuning alone, then adjust	Move		Enter	Return
	the frequency as best as possible (coarse) and Fine-tune
	again.		Image Lock
	After the noise has been reduced, re-adjust the picture so that					50
		Coarse
	it is aligned on the center of screen.	Fine				13

1Press the ▲ or ▼ button to select Coarse or Fine, then press the ENTER button.

2Press the ◄ or ► button to adjust the screen quality, vertical stripes may appear or the picture may be blurry. Press the ENTER button.

 Position	Move		Enter	Return
Adjust the PC’s screen positioning if it does not fit the PDP
Display screen.			Position
1 Adjust the position by pressing the ▲/▼/◄/► button.
2 Press the ENTER button.
 Auto Adjustment
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal.
The values of fine, coarse and position are adjusted
automatically.	Move		Enter	Return
 Image Reset
You can replace all image settings with the factory default
values.	Auto Adjustment in Progress
 Zoom: Zoom/Position/Reset		Please wait.
- Zoom: 0 - 1 - 2 - 3 - 4 - 5 - 6
Option 0 represents a normal screen.	Image Reset is completed.
The greater the number, the more magnified the
screen.
		Return
You can select the position and reset functions by
selecting options 1 through 6. (If you select option 0,
the position and reset functions are not selected.)
If you have selected the Zoom function as between 1~6,
you will not be able to select the Auto Adjustment function.

-Position: You can adjust the position.

-Reset: The previously adjusted settings will be reset to the factory defaults.

English - 33