Other Information
Issues | Solutions and Explanations |
The PIP menu is not available. | • PIP functionality is only available when you are using a HDMI source. |
|
|
You turned the TV off 45 minutes ago, and | • It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade fi rmware |
it turned on again. | downloaded whilst your watching TV. |
|
|
The message “Scramble signal” or “Weak | • If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot. |
Signal/No Signal” appears. | • If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again. |
|
|
There are recurrent picture/sound issues. | • Check and change the signal/source. |
|
|
A reaction may occur between the rubber | • To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture. |
cushion pads on the base stand and the |
|
top fi nish of some furniture. |
|
|
|
✎This panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.skrhk
¦Storage and Maintenance
✎If you attched some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.
Do not spray water or a cleaning agent directly onto the product. Any liquid that goes into the product may cause a failure, fi re, or electric shock.
Clean the product with a soft cloth dapped in a small amount of water.
[CAUTION
If the height of " A " on one side is different from the other side, adjust the heights.
English 41