Changing the direction of the door opening(RL34SC*)

COVER TOP FRONT

CAP SPACER DOOR

HINGE UPP

COVER DOOR UPP

CAP HINGE HOLE

Safety Precautions

If the appliance is disconnected from the power supply, you should wait for at least five minutes before reconnecting the power to avoid damaging the compressor.

CAUTION: If the flexible power cord is damaged, it must be repaired by special tools. Thus, it must be replaced

7

SCREW A

SHAFT HINGE

CAP HINGE HOLE

CAP SCREW CABI

SCREW F

MID HINGE

SCREW A

SCREW E

REINF

HINGE LOW

SCREW HEX (SCREW D)

FOOT

SCREW HEX

SCREW D

STOPPER DOOR

SCREW G

STOPPER HINGE LOW

FIXER HINGE LOW

SHAFT HINGE

STOPPER DOOR

SCREW G

FOOT

by the repair store appointed by the manufacturer.

Do not use inflammable aerosols such as spray paint and dope near the refrigerator. Otherwise, there will be a risk of explosion.

Do not let children hang on the doors or climb the refrigerator to avoid damaging the refrigerator and injuring the children.

Do not store corrosive, inflammable and explosive, strong acid or alkali substances such as butane, ether, vitriol, benzene, and alcohol. Bottles containing liquid foods also shall not be stored in the freezer; otherwise the bottles may be broken.

If the refrigerator can not work normally or is damaged, do not continue using it. Pull out the power plug and contact the

Simply Type:

1.Take down HINGE UPP and SHAFT-HINGE and install them at the opposite side of the HING-UPP. Take down COVER DOOR UPP and fridge door.

2.Take down SCREW A, SCREW E and MID HINGE, and then the refrigerator door. Take down CAP HINGE HOLE, CAP SCREW CABI and SCREW F. Then fix them at right.

3.Gently incline the appliance in less than 45 degree, remove the right side FOOT, and unfasten the SCREW D. Take down HINGE LOW, FIXER HINGE LOW ,SHIFT HINGE and STOPPER HINGE LOW. Reverse and fix STOPPER HINGE LOW with FIXER HINGE LOW to the left of HINGE LOW and SHIFT HINGE.

4.Take down left FOOT and unfasten SCREW D. Take down and fix REINF to the right. Then install FOOT.

5.Take down SCREW G and STOPPER DOOR in the fridge and freezer doors and install them at the left of the doors. Take down CAP HOLE DOOR and CAP SPACER DOOR and fix them at the left of the doors,

6.Fix MID HINGE with SCREW A and SCREW E, and install the freezer door Fix HINGE-LOW to the left and install FOOT.Put the refrigerator stable and install the fridge door.

Fix HINGE UPP with SCREW A.

local service center immediately. If the power cord is damaged, to avoid any accident, it must be replaced by service agent of the manufacturer or a qualified staff.

Do not splash water on the top or back of the refrigerator to avoid reducing the insulation effects of the appliance.

If you wish to dispose of the refrigerator, please first remove the door seals.

When the appliance is disposed of, it shall be handled by professional staff instead of being discarded casually; otherwise it may cause hazards or other dangers to the environment.

14

3

Page 4
Image 4
Samsung RL34SCSW1/XEO manual Changing the direction of the door openingRL34SC, Safety Precautions