Put the 4 insulation holders on the PDP in the grooves of the wall mount bracket and
4 pull down on the PDP (Œ) to secure it to the wall mount bracket (´). Tighten the screws as shown (ˇ) so that the PDP cannot be separated from wall mount bracket.
PDP panel
Wall
Wall attachment panel bracket
Connecting External Devices to the PDP
To connect external devices such as a DVD or a Home Theater System to the PDP, please refer to following instructions:
1 Be sure to remove the safety pins underneath the PDP.
• If the safety pins are not removed, the angle cannot be adjusted. Any attempt to do so may cause damage to the PDP.
Pull out the bottom of the PDP (which has been attached to the Wall Mount Bracket)
2 in the direction indicated by the arrows (refer to the illustration) until it clicks.
•Using the PDP After Connecting External Devices.
Be sure to secure the PDP by inserting the 2 locking pins after readjusting the angle of the PDP to 0°.
•For safety, be sure to secure the PDP using the locking pins.
If the safety pins are not used, the PDP may fall, causing serious injury.
12