Samsung PS-42Q91HP, PS-50Q91HP manual Screen Burn Protection

Source: TV/AV1/AV2

You can select a source of the sub-picture.

➢You can select these options simply by pressing the SOURCE button on the remote control.

Size: / /

You can select a size of the sub-picture.

➢It is available in HDMI mode.

Position: / / /

You can select a position of the sub-picture.

➢You can select these options simply by pressing the POSITION button on the remote control.

Programme

You can select a channel of the sub-picture only when the Source is set to TV.

➢You can select the channel of the sub picture simply by pressing the P or P button.

Table of PIP Settings

X - This PIP combination is not available.

O - This PIP combination is available.

Sub	TV analog	AV1	AV2	S-Video	Component	HDMI	PC
Main
Component	O	O	O	X	X	X	X
HDMI	O	O	O	X	X	X	X
PC	O	O	O	X	X	X	X

Screen Burn Protection

To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes.

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Setup, then press the ENTER/OK button.

T V		Setup
	 More
	Wall-Mount Adjustment		
	Energy Saving	: Off	
	HDMI Black Level : Normal		
	PIP		
	Screen Burn Protection		
	Move	Enter	Return

3Press the ▲ or ▼ button to select Screen Burn Protection, then press the ENTER/OK button.

4Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.

Available options: Pixel Shift, All White, Signal Pattern,

Side Gray

5When you are satisfied with your setting, press the ENTER/OK button.

6Press the EXIT button to exit.

T V	Screen Burn Protection
	Pixel Shift		
	All White		
	Signal Pattern		
	Side Gray	: Dark	
	Move	Enter	Return

Pixel Shift: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after image on the screen.

−Set Pixel Shift to On by pressing the ▲ or ▼ button, then press the ENTER/OK button.

−Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.

Available options: Horizontal Dot, Vertical Line, Time

T V		Pixel Shift
	Pixel Shift		: On	
	Horizontal Dot		: 2	
	Vertical Line		: 2	
	Time		: 2 min	
	Move		Enter	Return

Continued...

English - 27