Samsung PS-42Q91HP, PS-50Q91HP Setting Up Anynet+, Scanning and Switching between Anynet+ Devices

Setting Up Anynet+

The following settings are to use Anynet+ functions.

Using the Anynet+ Function

1Press the Anynet+ button.

Press the ▲ or ▼ button to select Setup, then press the ENTER/OK button.

2Press the ENTER/OK button to select Anynet+ (HDMI-CEC), then press the ENTER/OK button.

3Press the ▲ or ▼ button to select On, then press the ENTER/OK button.

➢The Anynet+ (HDMI-CEC) function is enabled.

➢If you select Off, Anynet+ (HDMI-CEC) is disabled.

TV	P 1
	View TV
	Select Device		
	Record		
	Menu on Device		
	Device Operation		
	Receiver	:Off	
	Setup		
	Move	Enter
	Return
		Setup
Anynet+ (HDMI-CEC)			: OffOff
Auto Turn Off			: OffOn
Searching Connections
	Move		Enter	Return

Turning an Anynet+ Device Off Automatically when the TV is Turned Off
2 Press the ▲ or ▼ button to select Auto Turn Off, then press		Setup
the ENTER/OK button.	Anynet+ (HDMI-CEC)		: On
3 Press the ▲ or ▼ button to select On, then press the
ENTER/OK button.	Auto Turn Off		: Off
			Off
➢ The Auto turn off function is enabled.	Searching Connections		On
➢ If you select Off, the Auto turn off function is canceled.
Press the EXIT button to exit.	Move	Enter		Return
➢ The Select Device setting of the TV remote control is to be set

to TV to use the Anynet+ function.

➢ If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off. However, if the device is recording, it may not be turned off.

➢ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.

Scanning and Switching between Anynet+ Devices

1 Press the Anynet+ button.

2 Press the ▲ or ▼ button to select Select Device, then press			TV	P 1
	the ENTER/OK button.			View TV			DVDR1
3	Press the ▲ or ▼ button to select to a particular	device and		Select Device			DVDR2
	press the ENTER/OK button.			Record			DVD1
4	It is switched to the selected device.	or ▼ button		Menu on Device			DVD2
	If you cannot find a device you want, press the ▲			Device Operation		
	to select Searching Connections, then press the	ENTER/OK		Receiver	:Off	
	button.			Setup		
	The meassage Configuring Anynet+ connection... is			Move	Enter
	displayed. When searching devices completes, the connected			Return
	devices are listed in the Anynet+ menu.				Setup
➢ Switching to the selected devices may take up to 2 minutes.
			Anynet+ (HDMI-CEC)			:	On
	You cannot cancel the operation during the switching							
	operation.		Auto Turn Off			:	On	
➢ The time required to scan for devices is determined by the			Searching Connections					
	number of connected devices.
➢ When the device scan is complete, the number of found
	devices is not displayed.			Move	Enter		Return
➢ Although the TV automatically scans devices when it is turned					a specific circumstance
	on using the POWER button, devices connected when the TV is on or under
	are not displayed in the device list. Therefore select Searching Connections				menu to search
	devices.				you cannot use the
➢ If you have selected external input mode by pressing the SOURCE button,
	Anynet+ function. Make sure to switch to an Anynet+ device by using the Anynet+ button.

English - 33