Samsung PS-42Q91HP, PS-50Q91HP manual Input Mode PC, KHz

Input Mode (PC)

Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported:

Video	Resolution	Vertical	Horizontal	Vertical	Horizontal	PS-42Q91H/	PS-50Q91H/
		frequency	frequency
Signal	(Dot X Line)			polarity	polarity	PS-42Q91HP	PS-50Q91HP
		(Hz)	(kHz)
	640 x 350	70.086	31.469	N	P	✔	✔
	720 x 400	70.087	31.469	P	N	✔	✔
		59.940	31.469	N	N	✔	✔
	640 x 480	70.000	35.000	N/P	N/P	✔	✔
		72.809	37.861	N	N	✔	✔
		75.000	37.500	N	N	✔	✔
IBM PC / AT		60.317	37.879	P	P	✔	✔
		70.000	43.750	N/P	N/P	✔	✔
Compatible	800 x 600
		72.188	48.077	P	P	✔	✔
		75.000	46.875	P	P	✔	✔
		60.004	48.363	N	N	✔	✔
	1024 x 768	70.069	56.476	N	N	✔	✔
		72.000	57.672	N/P	N/P	✔	✔
		75.029	60.023	P	P	✔	✔
	1360 x 768	60.015	47.712	P	P		✔

(N: Negative / P: Positive)

The interlace mode is not supported.

The television might operate abnormally if a non-standard video format is selected.

480i/p, 576i/p, 720p, or 1080i is not available in PC mode.

For the PS-42Q91H/PS-42Q91HP, PC text quality is optimum in XGA mode (1024 x 768@60Hz).

For the PS-50Q91H/PS-50Q91HP, PC text quality is optimum in WXGA mode (1360 x 768@60Hz). (The three pixels each on the left and right are grayed at the resolution setting of 1360 x 768@60Hz. This is not a mechanical problem but a result caused by the pixel difference between the standard resolution and the PDP panel.)

English - 29