Samsung PS-42S5S manual Insert the screw into the plastic hanger, See the figure below

Page 11

Installing the Display on the Wall Attachment Panel (continued)

To mount the product on the wall bracket

The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same)

1

Remove the 4 screws on the back of the product.

2

Insert the screw into the plastic hanger.

 

 

 

(See the figure below)

 

 

 

Mount the product on the wall bracket

 

 

 

and make sure it is properly fixed to

 

 

 

the left and right plastic hangers.

 

 

 

Be careful when installing the product

 

 

 

on the bracket as fingers can be

 

 

 

caught in the holes.

 

 

 

Make sure the wall bracket is securely

 

 

 

fixed to the wall, or the product may not

 

 

 

stay in place after installation.

3

Tighten the 4 screws in step 2 (plastic hanger

4

Remove safety pin (#) and insert the 4 product

 

+ screw ) to the rear holes of the product.

 

holders into the corresponding bracket holes (!). Then

 

 

 

place the product (@) so that it is firmly fixed to the

bracket. Make sure to reinsert and tighten the safety pin (#) to securely hold the product to the bracket.

PDP

Wall Bracket Wall

Wall Bracket Angle Adjustment

Adjust the bracket angle to -2obefore installing it on the wall.

1Fix the product to the wall bracket.

2Hold the product at the top in the center and pull it forward (direction of the arrow) to adjust the angle. (See the figure to the right)

3You can adjust the bracket angle between -2° and 15°.

Make sure to use the top center, and not the left or the right side of the product to adjust the angle.

English - 11

Image 11
Contents PDP-TELEVISION User Instructions PC Cable Power CordOwner’s Instructions Video CableContents Symbols Front of the TV Control PanelFor further details about connection, refer to pages 58~63 Rear PanelInfrared Remote Control Assembling the Stand-Base Inserting the Batteries in the Remote ControlInsert and tighten the Captive Screw Installing the Display on the Wall Attachment PanelWall Bracket Hinge Accessories Plastic Hanger Screw Adjust the lengthLeft and right plastic hangers Stay in place after installationInsert the screw into the plastic hanger See the figure belowRear of the TV Connecting to an Aerial or Cable Television NetworkConnecting a Satellite Receiver or Decoder Using a coaxial cableMains lead is attached to the rear of your television Switching Your Television On and OffTo switch your television off, press the power button again Their functions Familiarizing Yourself with the Remote ControlChange channels and adjust the volume Press the Enter button to set the clock Plug & Play FeaturePress the Enter button For further details on settings, refer to the previousChoosing Your Language Press the Menu button Result The main menu is displayedSelect your Country by pressing the … or † button Storing Channels AutomaticallyAuto Storing ChannelsManuallyChannel mode Skipping Unwanted Channels This operation allows you to change the programme numbers Sorting the Stored ChannelsAssigning Names to Channels Locking the Channel Using the LNA Low Noise Amplifier Feature Fine Tuning Channel Reception Changing the Picture Standard Displaying InformationTint Ntsc only Customizing the Picture SettingsResult Following options are available Preset to the PC mode by pressing the Source button Setting the Picture PC ModeSetting the Picture PC Mode Selecting the Picture Size Positioning and Sizing the screen using ZoomFreezing the Current Picture Viewing the DNIe DemonstrationEmphasizing warm skin colours Setting the My Colour Control Easy ControlEmphasizing clear blues Emphasizing mild greensSetting the My Colour Control Detail Control Setting the Blue Screen Using the Colour Weakness Enhancement Feature Using the Energy Saving Feature TV Ext.1 Ext.2 AV S-Video Viewing the Picture in Picture PIPTvpip PIP Table of PIP Settings Easy functions of the remote controlButtons Feature Using the Digital NR Noise Reduction Feature Horizontal Dot Vertical Line Time Preventing Screen Burn-inReducing the Effects of Screen Burn Standard Music Movie Speech Custom Changing the Sound StandardAdjusting the Volume Automatically Customizing the Sound SettingsOff 3D Mono Stereo Setting the TruSurround XTSelecting the Internal Mute Setting the Melody SoundSelecting the Sound Mode depending on the model Setting and Displaying the Current Time Setting the Sleep Timer Switching the Television On and Off Automatically Auto Power Off Hdmi on the TV’s rear panel Viewing an External Signal SourceRedirecting an Input to the External Output Part Contents Teletext FeaturePress the TTX/MIX button again Displaying the Teletext InformationTo display Press Selecting Display OptionsSelecting a Teletext Input Connecting to External Input/OutputInput/Output Specification Connecting to the AV Output Connecting to the S-Video Input Connecting to the RCA InputConnecting to the PC Input Connecting to the Component InputHDMI/DVI in connector is used for equipment with a DVI out Connecting to the Hdmi InputConnecting to the HDMI/DVI Compatible To Display the DVD Home Theater Connecting Home Theater SystemConnecting the Home Theater System Setting up Your PC Software Windows only Video Signal Resolution Vertical Horizontal Input Mode PCVCRs, DVD players, Cable boxes, and Set-Top Boxs Your TV comes equipped with a universal remote control.Remote control might not be compatible with all SamsungProgramming the Remote Control for Other Components Normal picture but no sound Check the volume Power buttonCheck the picture contrast and brightness settings Check the volumeMemo Memo Memo Correct Disposal of This Product After Sales Service